
Tamagotchi
TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!

A "generic" tamagotchi, shaped like a flower.
Tamagotchi is an open-source printed circuit board by linalg137, from the linalg137/hanagotchi repository on GitHub. It is a 2-layer board of 83.1 × 93.8 mm with 11 parts on 20 nets, routed with 95 tracks and 0 vias.
It is built around the 1207-P6.5MM and HS96L03W2C03. It belongs with the ESP32 and RISC-V boards of this library.
A small "tamagotchi", shaped like a flower. It has three interactive buttons and an OLED screen, and can play many different files-- coded in micropython. This isn't a generic "pet" tamagotchi-- you're guarding a dangerous invisible criminal-- try not to let them get out!!
As a constant fiction writer, I've always wanted to create my own special dialogue-based game. This gave me the perfect chance to do so, while including extrenally aeshtetic pleasures as well.
getting the pcb
getting the parts
printing the case
soldering and putting everything together
This project used:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SW_Push | easyeda2kicad:SW-TH_4P-L4.5-W4.5-P3.00-LS4.8 | SW1, SW2, SW3 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 1207-P6.5MM | easyeda2kicad:BUZ-TH_BD12.5-P6.50-D1.4 | BUZZER |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT |
| 1 | HS96L03W2C03 | easyeda2kicad:OLED-TH_L27.8-W27.2-P2.54_C9900033791 | OLED screen |
| 1 | XIAO-ESP32-C3-SMD | Module:XIAO-ESP32-C3-DIP-SMD | ESP32 |
The 9 most common of 11 parts.

TaniWanKenobi/tamagotchi
A custom PCB-based Tamagotchi virtual pet built with the XIAO-ESP32-C6!



shelxty/lego-tamagotchi
Simple tamagotchi with OLED display screen, buzzer, and 3 buttons custom-made in KiCad, with parts assembled in OnShape.

alex-technologia/Realistic-tamagochi
A tamagochi but much more realistically accurate

Ayush09S/Tamagotchi
A small digital pet as a physical device remake! It features an LDR that can detect light changes, four buttons, and a buzzer. It also has an OLED display!


hiralsinghal/Tamagotchi
This is a Tamagotchi. It is a small handheld video game in which you have a pet. You can play with it, feed it and more depending on your firmware code.
It measures 83.1 × 93.8 mm and has 2 copper layers, 1.69 mm thick.
11 parts, built around the 1207-P6.5MM and HS96L03W2C03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the linalg137/hanagotchi repository on GitHub, at the commit this page was made from: the board is pcb/Tamagotchi.kicad_pcb and its schematic pcb/Tamagotchi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask linalg137 before reusing the design.