

ESP32-S3-MultiIO
ESP32 based LCC Boards
- Size
- 225 × 120 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 141
- Nets
- 246
- Pads
- 682
- Tracks, vias
- 1,031, 146
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Dec 2022
- Updated
- 22 Oct 2026
Overview
ESP32-S3-MultiIO is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/ESP32-LCC repository on GitHub. It is a 2-layer board of 225 × 120 mm with 141 parts on 246 nets, routed with 1,031 tracks and 146 vias.
It is built around the ESP32-S3FN8, LM2574N-3.3 and MCP23017-E/SS, with the USBLC6-2SC6 and RJ45 among its other parts. Its parts include 47 capacitors, 40 resistors, 20 connectors, 14 ICs and 5 diodes. It belongs with the ESP32 boards of this library.
Main components
5ESP32-S3FN8
QFN-56-EP(7x7)Watchdog reset、Software reset、Built-in general-purpose timer、Built-in temperature sensor、Touch function、True random number generator (TRNG)、Storage encryption、Infrared remote control QFN-56-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)LM2574N-3.3
PDIP-8-40℃~+125℃@(TJ) 1 3.3V 40V 500mA 52kHz 7.5mA Buck Buck Built-in Fixed No PDIP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMCP23017-E/SS
SSOP-28(5.3x10.2x0.65)-40℃~+125℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascading and address extension SSOP-28 I/O Expanders ROHSMicrochip TechnologyI/O ExpandersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
ESP32-16LedDriver/README.mdESP32-16LedDriver
16 on/off LED Driver board using a MCP23017.
Parts
141| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 0 | ResistorWithJumper:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_WJumper | R701, R702, R703, R704, R705, R706, R707, R708, R709, R710, R711, R712, R713, R714, R715, R716 +8 |
| 24 | C | Capacitors_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C701, C702, C703, C704, C705, C706, C707, C708, C709, C710, C711, C712, C713, C714, C715, C716 +8 |
| 9 | 10K | Resistors_SMD:R_0402 | R201, R204, R205, R208, R214, R217, R218, R221, R222 |
| 7 | 100nf | Capacitors_SMD:C_0402 | C204, C205, C206, C207, C209, C212, C213 |
| 6 | Sink Source | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J503, J504, J505, J603, J604, J605 |
| 6 | Source Sink | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J506, J507, J508, J606, J607, J608 |
| 6 | TBD62X8X | Housings_DIP:DIP-18_W7.62mm | U501, U502, U503, U601, U602, U603 |
| 4 | 1uf | Capacitors_SMD:C_0402 | C203, C208, C211, C218 |
| 4 | 22pf | Capacitors_SMD:C_0402 | C214, C215, C216, C217 |
| 4 | MCP23017 | Housings_SOIC:SOIC-28W_7.5x17.9mm_Pitch1.27mm | U201, U202, U203, U204 |
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_3.5mm | MK101, MK102, MK103, MK104 |
| 3 | Fid Mark | Fiducials:Fiducial_Modern_SilkscreenTop | FD101, FD102, FD103 |
| 2 | - PWD + | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | J501, J601 |
| 2 | 10uf | Capacitors_SMD:C_0805 | C201, C202 |
| 2 | 2.4K | Resistors_SMD:R_0402 | R209, R211 |
| 2 | 270 | Resistors_SMD:R_0402 | R210, R212 |
| 2 | 60 Ohms | Resistors_SMD:R_1206 | R301, R302 |
| 2 | DFLS240-7 | Diodes_SMD:D_PowerDI-123 | D301, D302 |
| 2 | RJ45 | RJ45-8N-S:RJ45_8N-S | J301, J302 |
| 1 | - 15 in + | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | T301 |
| 1 | - 15 out + | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | T302 |
| 1 | .1 uf | Capacitors_SMD:C_0603 | C301 |
| 1 | 0 | Resistors_SMD:R_0402 | R213 |
| 1 | 100pf | Capacitors_SMD:C_0402 | C210 |
| 1 | 15 uf 15V | Capacitors_SMD:CP_Elec_4x5.7 | C302 |
| 1 | 2.0nH | Inductors_SMD:L_0402 | L201 |
| 1 | 22 uf 100V | Capacitors_SMD:CP_Elec_8x10 | C402 |
| 1 | 220 uf 25V | Capacitors_SMD:CP_Elec_8x10 | C401 |
| 1 | 330 uh | SRN1060:SRN1060 | L401 |
| 1 | 40 Mhz +/- 10 ppm | FA_20H:FA20_H | Y201 |
| 1 | 47 nf | Capacitors_SMD:C_0603 | C303 |
| 1 | ACT1 | LEDs:LED_0402 | D201 |
| 1 | ACT2 | LEDs:LED_0402 | D202 |
| 1 | BOOT | PTS647SN70SMTR2LFS:PTS647SM38SMTR2LFS | SW202 |
| 1 | CMSH1-60 TR13 | Diodes_SMD:D_SMB | D401 |
| 1 | Card 0 -- Outputs | Molex:Molex_KK_396_01x24_3.96mm_RightAngle | J502 |
| 1 | Card 1 -- Outputs | Molex:Molex_KK_396_01x24_3.96mm_RightAngle | J602 |
| 1 | Card 2 -- Inputs | Molex:Molex_KK_396_01x24_3.96mm_RightAngle | J701 |
| 1 | ESP32-S3FN8 | Housings_DFN_QFN:QFN-56-1EP_7x7mm_Pitch0.4mm | IC201 |
| 1 | LM2574N-3.3 | SOIC_Wide:SOIC-14_7.4x8.7mm_Pitch1.27mm | U401 |
| 1 | RESET | PTS647SN70SMTR2LFS:PTS647SM38SMTR2LFS | SW201 |
| 1 | TCAN332DR | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U301 |
| 1 | Termination | Pin_Headers:Pin_Header_Straight_2x02_Pitch2.54mm | JP301 |
| 1 | USBLC6-2SC6 | TO_SOT_Packages_SMD:SOT-23-6 | IC202 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Molex_47346-0001 | J201 |
More from RobertPHeller/ESP32-LCC
12- 2 layers165.1 × 132.1 mm

- 2 layers104.1 × 127 mm

- 2 layers99.1 × 125.7 mm

- 2 layers99.1 × 125.7 mm

- 2 layers104.1 × 127 mm

- 2 layers99.1 × 125.7 mm

- 2 layers119.4 × 127 mm

- 2 layers82.6 × 113 mm

- 2 layers115.6 × 130.8 mm

- 2 layers123.2 × 148.6 mm

- 2 layers115.6 × 130.8 mm

- 2 layers104.1 × 114.3 mm

Similar boards
- 2 layers156.2 × 168.9 mm

LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
236 parts24 - 2 layers100 × 75 mm

Display
DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock
209 parts5CERN-OHL-P-2.0 - 4 layers99.2 × 94.2 mm

- 4 layers55 × 55 mm

- 4 layers36 × 39 mm

- 2 layers195 × 148 mm

- 2 layers198.1 × 126.4 mm

ESP32-D0WD V3-ControlStand
RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand
196 parts3GPL-3.0 - 2 layers68.6 × 64 mm

Questions
How big is the ESP32-S3-MultiIO PCB?
It measures 225 × 120 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-S3-MultiIO use?
141 parts, built around the ESP32-S3FN8, LM2574N-3.3, MCP23017-E/SS and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-S3-MultiIO KiCad files?
From the RobertPHeller/ESP32-LCC repository on GitHub, at the commit this page was made from: the board is ESP32-S3-MultiIO/ESP32-S3-MultiIO.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-S3-MultiIO design in my own project?
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.