

ESP32-16LedDriver
ESP32 based LCC Boards
- Size
- 90.2 × 130.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 74
- Pads
- 295
- Tracks, vias
- 264, 42
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 28 Dec 2022
- Updated
- 22 Oct 2026
Overview
ESP32-16LedDriver is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/ESP32-LCC repository on GitHub. It is a 2-layer board of 90.2 × 130.8 mm with 39 parts on 74 nets, routed with 264 tracks and 42 vias.
It is built around the LM2574N-5.0, MCP23017-E/SS and RJ45, with the SB240-E3 and SB160-E3/54 among its other parts. Its parts include 8 ICs, 6 capacitors, 5 connectors, 3 diodes and 2 resistors. It belongs with the ESP32 boards of this library.
Main components
5LM2574N-5.0
PDIP-8-40℃~+125℃@(TJ) 1 4V~40V 500mA 52kHz 5V 5mA Buck Buck Built-in Fixed No DIP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMCP23017-E/SS
SSOP-28(5.3x10.2x0.65)-40℃~+125℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascading and address extension SSOP-28 I/O Expanders ROHSMicrochip TechnologyI/O ExpandersRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorisedSB240-E3
DO-204AC(DO-15)Schottky DiodesVishay IntertechnologySB160-E3/54
DO-41-65℃~+150℃ 1 Independent 1A 500uA@60V 50A 60V 650mV@1A DO-41 Schottky Diodes ROHSVishay IntertechnologySchottky Diodes
README
ESP32-16LedDriver/README.mdESP32-16LedDriver
16 on/off LED Driver board using a MCP23017.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2-5mm_RevA_Date21Jun2010 | MountingHole_2-5mm_RevA_Date21Jun2010 | MH, MH, MH, MH |
| 2 | .1 uf | C1 | C1, C6 |
| 2 | 1.5K Ohms | DIP-16__300 | RP1, RP2 |
| 2 | 60 Ohms | R1 | R1, R2 |
| 2 | CA A CK | 3PosJumper | JP2, JP3 |
| 2 | CA B CK | 3PosJumper | JP4, JP5 |
| 2 | RJ45 | RJ45_8N-S | J1, J2 |
| 2 | SB240E | DO-35 | D1, D2 |
| 2 | TBD62X83A | DIP-18__300 | U5, U6 |
| 1 | + 15 in - | ScrewTerm2.54-2 | T1 |
| 1 | + 15 out - | ScrewTerm2.54-2 | T2 |
| 1 | 0 1 2 | pin_array_3x2 | P1 |
| 1 | 10K Ohms | SIL-5 | RR1 |
| 1 | 15 uf 15V | C1.5V8V | C2 |
| 1 | 22 uf 100V | C1-3V8 | C5 |
| 1 | 220 uf 25V | C1-3V8 | C4 |
| 1 | 330 uh | PE-LowProfile | L1 |
| 1 | 47 nf | C1 | C3 |
| 1 | C A0 A1 A2 A3 A4 A5 A6 A7 | ScrewTerm_2.54-9 | P2 |
| 1 | C B0 B1 B2 B3 B4 B5 B6 B7 | ScrewTerm_2.54-9 | P3 |
| 1 | ESP32_DEVKIT_C or TTGO-T1 | ESP32-Devkit-C | U0 |
| 1 | LM2574N-5.0 | DIP-8__300 | U3 |
| 1 | MCP23017 | DIP-28__300 | U4 |
| 1 | SB160-E3/54 | DO-41 | D3 |
| 1 | SN65HVD233-HT | DIP-8__300 | U2 |
| 1 | TCAN332DR | SOIC-8_N | U1 |
| 1 | TTGO-T1 | TIGO-T1 | U0A |
| 1 | Termination | PIN_ARRAY_2X2 | JP1 |
More from RobertPHeller/ESP32-LCC
12- 2 layers165.1 × 132.1 mm

- 2 layers104.1 × 127 mm

- 2 layers225 × 120 mm

- 2 layers99.1 × 125.7 mm

- 2 layers99.1 × 125.7 mm

- 2 layers104.1 × 127 mm

- 2 layers99.1 × 125.7 mm

- 2 layers119.4 × 127 mm

- 2 layers82.6 × 113 mm

- 2 layers115.6 × 130.8 mm

- 2 layers123.2 × 148.6 mm

- 2 layers115.6 × 130.8 mm

Similar boards
- 2 layers87.6 × 128.3 mm

PocketBeagle16LedDriver
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
40 parts24 - 2 layers184.1 × 144.1 mm

ESP32ControlStand
RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand
120 parts3GPL-3.0 - 2 layers126.8 × 117.6 mm

- 2 layers195 × 148 mm

- 2 layers68.6 × 64 mm

- 2 layers150 × 100 mm

Ant sw control
sq9fk/ant-sw-2x6
Firmware sterownika przełącznika antenowego 6 anten × 2 TRX oparty na projekcie RemoteQTH 6×2 Antenna Controller (oryginał OK1HRA, rev 0.3), zmodyfikowany przez SQ9FK na potrzeby stacji SP9PDF.
145 parts - 2 layers126.6 × 21.4 mm

ADBv2
mattchesters/zmk-apple-desktop-bus-keyboard
ZMK shield for Apple Desktop Bus Keyboard
17 parts168MIT - 2 layers40 × 100 mm

Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0
Questions
How big is the ESP32-16LedDriver PCB?
It measures 90.2 × 130.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-16LedDriver use?
39 parts, built around the LM2574N-5.0, MCP23017-E/SS, RJ45 and SB240-E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-16LedDriver KiCad files?
From the RobertPHeller/ESP32-LCC repository on GitHub, at the commit this page was made from: the board is ESP32-16LedDriver/ESP32-16LedDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-16LedDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.