
PocketBeagleCommandStation SMD
RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters

Command Stations and Boosters
ESP32-C3-Booster is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/CommandStationsAndBoosters repository on GitHub. It is a 2-layer board of 87.6 × 81.5 mm with 97 parts on 81 nets, routed with 592 tracks and 88 vias.
It is built around the DRV8873HPWPRQ1, LM2574HVM-3.3 and LM358, with the USBLC6-2SC6, VO615A and DFLS240 among its other parts. Its parts include 22 resistors, 18 capacitors, 14 diodes, 10 ICs and 7 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Through hole version of the PocketBeagle LCC/DCC Command Station. This is a DCC command station that is a LCC node. It implements the OpenLCB train protocol node over LCC and converts that to DCC commands. It includes a booster and puts the DCC signal on the LCC bus (pins 4 and 5). It implements a programming track and implements Railcom. The Command Station uses a PocketBeagle as the processing element and uses the PRUs (Programmable Realtime Units) to generate the DCC signal. (See PocketBeagleCommandStation_SMD for a SMD version.)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistors_SMD:R_0603 | R501, R502, R503, R506, R507 |
| 4 | DFLS240 | Diodes_SMD:D_PowerDI-123 | D303, D304, D402, D403 |
| 3 | 100 nf | Capacitors_SMD:C_0603 | C301, C504, C505 |
| 3 | 10K | Resistors_SMD:R_0402 | R201, R202, R203 |
| 3 | Fiducial | Fiducials:Fiducial_classic_Small_SilkscreenTop_Type1 | FD101, FD102, FD103 |
| 2 | 1 uf | Capacitors_SMD:C_0603 | C501, C503 |
| 2 | 10 nf | Capacitors_SMD:C_1206 | C101, C405 |
| 2 | 160 | Resistors_SMD:R_0603 | R301, R302 |
| 2 | 22pf | Capacitors_SMD:C_0402 | C201, C202 |
| 2 | 270 | Resistors_SMD:R_0402 | R205, R206 |
| 2 | 3K | Resistors_SMD:R_0603 | R101, R103 |
| 2 | 47 nf | Capacitors_SMD:C_0603 | C302, C502 |
| 2 | 5.1K | Resistors_SMD:R_0402 | R204, R207 |
| 2 | 5A | MF-R500:MFR500 | F101, F102 |
| 2 | 60 | Resistors_SMD:R_1206 | R303, R304 |
| 2 | Mounting_Hole | Mounting_Holes:MountingHole_3.5mm | MK101, MK102 |
| 2 | RJ45 | RJ45-8N-S:RJ45_8N-S | J302, J303 |
| 1 | DWSLogoBCU:DWSLogoBCU | ||
| 1 | - Fan + | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J601 |
| 1 | - Power + In - | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_3pol | J101 |
| 1 | 0.005 1% | Resistors_SMD:R_0612 | R504 |
| 1 | 1.5v 10ma | Diodes_SMD:D_SOD-323 | D501 |
| 1 | 10 uf | Capacitors_SMD:CP_Elec_5x5.3 | C406 |
| 1 | 100 uf | Capacitors_SMD:C_0603 | C601 |
| 1 | 15 uf 15V | Capacitors_SMD:CP_Elec_4x5.8 | C303 |
| 1 | 1K | Resistors_SMD:R_0603 | R601 |
| 1 | 1SS352H3F | Diodes_SMD:D_SOD-323 | D601 |
| 1 | 1uf | Capacitors_SMD:C_0402 | C210 |
| 1 | 2.2K | Resistors_SMD:R_0603 | R505 |
| 1 | 2.4 | Resistors_SMD:R_1206 | R102 |
| 1 | 22 uf 100V | Capacitors_SMD:CP_Elec_8x10 | C403 |
| 1 | 220 uf 25V | Capacitors_SMD:CP_Elec_8x10 | C401 |
| 1 | 3.3V | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | TP401 |
| 1 | 330 mh | SRN1060:SRN1060 | L401 |
| 1 | 47 uf | Capacitors_SMD:CP_Elec_6.3x5.3 | C506 |
| 1 | ACT1 | LEDs:LED_0402 | D201 |
| 1 | ACT2 | LEDs:LED_0402 | D202 |
| 1 | BOOT | Buttons_Switches_SMD:SW_SPST_B3U-1000P-B | SW202 |
| 1 | BRAKE | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | TP503 |
| 1 | BSP52T3G | TO_SOT_Packages_SMD:SOT-223 | Q601 |
| 1 | CMSH1-60 | Diodes_SMD:D_SMA | D401 |
| 1 | DRV8873HPWPR | SOP65P640X120:SOP65P640X120-25N | U501 |
| 1 | ESP32-C3-WROOM | ESP32-WROOM:ESP32-C3-WROOM | IC201 |
| 1 | Fan_IEC60617 | FAN:25mmFanMount | M601 |
| 1 | INA180B | TO_SOT_Packages_SMD:SOT-23-5 | U101 |
| 1 | IN_A | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | TP501 |
| 1 | IN_B | Measurement_Points:Measurement_Point_Round-SMD-Pad_Big | TP502 |
| 1 | LCC | LCC_LOGO:LCC_LOGO_4.5x4.5 | G*** |
| 1 | LCC Power In | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | T302 |
| 1 | LCC Power Out | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | T301 |
| 1 | LF120_TO220 | TO_SOT_Packages_SMD:TO-252-2 | U402 |
| 1 | LM2574HVM-3.3 | SOIC_Wide:SOIC-14_7.4x8.7mm_Pitch1.27mm | U401 |
| 1 | LM358 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U301 |
| 1 | MCP9700T-E_LT | SOT65P210X110-5N:SOT65P210X110-5N | U601 |
| 1 | Mounting_Hole_PAD | Mounting_Holes:MountingHole_3.5mm_Pad | MK104 |
| 1 | OPS ActA | LEDs:LED_0603 | D103 |
| 1 | OPS ActB | LEDs:LED_0603 | D102 |
| 1 | Output to tracks | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J102 |
| 1 | RB080LAM-30TR | RB080LAM-30TR:PMDTM | D101 |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_B3U-1000P-B | SW201 |
| 1 | Rx | LEDs:LED_0603 | D302 |
| 1 | TCAN332DR | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U302 |
| 1 | Termination | Pin_Headers:Pin_Header_Straight_2x02_Pitch2.54mm | J301 |
| 1 | Tx | LEDs:LED_0603 | D301 |
| 1 | USBLC6-2SC6 | TO_SOT_Packages_SMD:SOT-23-6 | IC202 |
| 1 | USB_C | GCT_USB:GCT_USB4105-GF-A | J201 |
| 1 | VO615A | Housings_SOIC:SO-4_7.6x3.6mm_Pitch2.54mm | U502 |
The 92 most common of 97 parts.

RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters

RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters

RobertPHeller/CommandStationsAndBoosters
Command Stations and Boosters




Nandini-6126/Router_PCB_WEB_AI
Upload a KiCad .kicadpcb, parse it to JSON, run an A\ router, and download the results — all from a simple web UI (FastAPI backend + Vite/React frontend).

Multiflexmeter/PZLD-Zoutwachter
Automated groundwater conductivity readout based CN0359

jhyland87/Cryocooler-Controller
Control system for STI Hybrid-98 Stirling cycle cryocooler.



louisreg/Open-TWIST
An open-source and open-hardware benchtop neurostimulator offering precise, programmable, and arbitrary waveform generation for neuroscience research.


It measures 87.6 × 81.5 mm and has 2 copper layers, 1.6 mm thick.
97 parts, built around the DRV8873HPWPRQ1, LM2574HVM-3.3, LM358 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/CommandStationsAndBoosters repository on GitHub, at the commit this page was made from: the board is ESP32-C3-Booster/ESP32-C3-Booster.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.