2 layers100 × 60 mm
2 layers81.8 × 65.4 mm
PWMGenerator rkroetch1
robertkroetch/PCB_Project- Size
- 81.8 × 65.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 27
- Pads
- 80
- Tracks, vias
- 131, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Dec 2025
- Updated
- 17 Dec 2025
Overview
PWMGenerator rkroetch1 is an open-source printed circuit board by robertkroetch, from the robertkroetch/PCB_Project repository on GitHub. It is a 2-layer board of 81.8 × 65.4 mm with 30 parts on 27 nets, routed with 131 tracks and 13 vias.
It is built around the 1N4005G, AS11CP and NANOSMDC016F-2. Its parts include 11 resistors, 6 diodes, 4 transistors, 3 capacitors and 2 ICs.
Main components
3
1N4005G
General-purpose 1A/600V rectifier diode in DO-41 package, manufactured by several semiconductor companies.Taiwan Semiconductor CorporationUncategorisedAS11CP
插件-30℃~+85℃ 28V 50,000 cycles PC Pin Rectangular Columnar SPST Through Hole 插件 Slide Switches ROHSNKK SwitchesSlide Switches
NANOSMDC016F-2
12061.1Ω 1.6mm 10A 160mA 3.2mm 300ms 450mA 48V 500mW 5Ω 1206 Resettable Fuses ROHSLittelfuseResettable Fuses
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1N4005G | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R1, R8 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q3, Q4 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 390k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Piher_PT-15-V15_Vertical_Hole | R9 |
| 1 | 8.2k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | AS11CP | Library:SW_AS11CP | SW1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | V1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LED_GREEN | LED_THT:LED_D5.0mm | D6 |
| 1 | LM339AJ | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | NANOSMDC016F-2 | Library:RESC3115X65N | F1 |
Questions
How big is the PWMGenerator rkroetch1 PCB?
It measures 81.8 × 65.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PWMGenerator rkroetch1 use?
30 parts, built around the 1N4005G, AS11CP and NANOSMDC016F-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PWMGenerator rkroetch1 KiCad files?
From the robertkroetch/PCB_Project repository on GitHub, at the commit this page was made from: the board is PWMGenerator-rkroetch1/PWMGenerator-rkroetch1.kicad_pcb and its schematic PWMGenerator-rkroetch1/PWMGenerator-rkroetch1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PWMGenerator rkroetch1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask robertkroetch before reusing the design.
Similar boards
- 2 layers300 × 53 mm
BMW E30 VFL SI Board
FabianGmeiner/BMW_E30_SI_Board
Reverse engineering and improving the BMW E30 service indicator board
112 parts20GPL-3.0 - 2 layers
- 2 layers124.5 × 63.5 mm
- 2 layers71.8 × 39.8 mm
PCB sensor
Thijs-Buisman/sensorsysteem-cartesius
Automatisch passantentelsysteem voor wijk Cartesius (Utrecht). Lasersensor + fotodiode op Arduino Nano met SD-logging en RTC. Ontwikkeld voor QUEST-project 'Gezond leven in Cartesius' – Hogeschool Utrecht 2026.
55 parts - 2 layers52.2 × 52.2 mm
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
30 parts3kApache-2.0 - 2 layers40.6 × 15.2 mm
- 2 layers270 × 11 mm
Daylight
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
30 parts1.1kGPL-3.0