2 layers
2 layers124.5 × 63.5 mm
PWMGenerator BrodyLaxton
BrodyLaxton/pcb-projectpcb project for practical electronics
- Size
- 124.5 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 27
- Pads
- 83
- Tracks, vias
- 145, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Dec 2025
- Updated
- 15 Dec 2025
Overview
PWMGenerator BrodyLaxton is an open-source printed circuit board by BrodyLaxton, from the BrodyLaxton/pcb-project repository on GitHub. It is a 2-layer board of 124.5 × 63.5 mm with 30 parts on 27 nets, routed with 145 tracks and 9 vias.
It is built around the LM339 and NANOSMDC016F-2. Its parts include 12 resistors, 6 diodes, 4 transistors, 3 capacitors and 2 ICs.
Main components
2Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1N4005 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5 |
| 3 | 2.2k | Resistor_SMD:R_0805_2012Metric | R1, R8, R10 |
| 2 | 2N3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | 2N3906 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 390k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 5k | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | R9 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Wuerth_694106106102_2.0x5.5mm | J2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | LM339 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | NANOSMDC016F-2 | Fuse:Fuse_Bourns_MF-RG300 | R12 |
| 1 | SW_SPST | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W8.61mm_P2.54mm | SW2 |
| 1 | _GREEN | LED_THT:LED_D5.0mm | D6 |
Questions
How big is the PWMGenerator BrodyLaxton PCB?
It measures 124.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PWMGenerator BrodyLaxton use?
30 parts, built around the LM339 and NANOSMDC016F-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PWMGenerator BrodyLaxton KiCad files?
From the BrodyLaxton/pcb-project repository on GitHub, at the commit this page was made from: the board is PWMGenerator-BrodyLaxton/PWMGenerator-BrodyLaxton.kicad_pcb and its schematic PWMGenerator-BrodyLaxton/PWMGenerator-BrodyLaxton.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PWMGenerator BrodyLaxton design in my own project?
Its repository states no licence, so its author keeps all rights: ask BrodyLaxton before reusing the design.
Similar boards
- 2 layers100 × 60 mm
- 2 layers81.8 × 65.4 mm
- 2 layers71.8 × 39.8 mm
PCB sensor
Thijs-Buisman/sensorsysteem-cartesius
Automatisch passantentelsysteem voor wijk Cartesius (Utrecht). Lasersensor + fotodiode op Arduino Nano met SD-logging en RTC. Ontwikkeld voor QUEST-project 'Gezond leven in Cartesius' – Hogeschool Utrecht 2026.
55 parts - 2 layers75 × 100 mm
Phased
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
77 parts530 - 2 layers50.8 × 107.9 mm
- 2 layers40 × 100 mm
Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0 - 2 layers98.5 × 59.8 mm
Neuron
giant-axon/lu.i-neuron-pcb
Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…
90 parts73CERN-OHL-S-2.0