

Triac out
Kicad libs with spice models, 3Ds and others
- Size
- 44.6 × 16.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 13
- Pads
- 30
- Tracks, vias
- 38, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Nov 2023
- Updated
- 23 Nov 2023
Overview
Triac out is an open-source printed circuit board by rnascunha, from the rnascunha/kicad-libs repository on GitHub, published under the MIT licence. It is a 2-layer board of 44.6 × 16.8 mm with 12 parts on 13 nets, routed with 38 tracks and 0 vias.
It is built around the MOC3021M. Its parts include 5 resistors, 2 capacitors, 2 connectors, 1 IC and 1 diode.
Main components
1README
README.mdkicad-libs
Kicad libs with spice models, 3Ds and others
Directories:
libs- spice models, datasheets, 3D step files...examples- examples/reference circuits, simulations...
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0nF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P10.00mm_Horizontal | C1 |
| 1 | 10nF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P10.00mm_Horizontal | C2 |
| 1 | 170 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 39 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | DC_in | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | MOC3021M | moc3021:DIP762W45P254L889H508Q6 | U1 |
| 1 | Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | Triac | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
More from rnascunha/kicad-libs
1- 2 layers

Similar boards
- 2 layers39 × 83 mm

- 2 layers134.4 × 106.7 mm

Led controller
MbFredys/PCB-LEDs-Controller
LED-controller PCB design exercise focused on PWM control, power distribution, and hardware documentation.
42 parts6 - 2 layers64.3 × 63 mm

Triac AC Dimmer 1P
Eninspace/triac
This project is based on esp8266 and TRIAC for control power via remote control.
28 parts5GPL-3.0 - 2 layers85.1 × 75.6 mm

- 2 layers

- 2 layers98.1 × 98.1 mm

- 2 layers95.9 × 129.5 mm

Solderin Station
kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included
73 parts3GPL-2.0 - 2 layers78.7 × 58.4 mm

Questions
How big is the Triac out PCB?
It measures 44.6 × 16.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Triac out use?
12 parts, built around the MOC3021M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Triac out KiCad files?
From the rnascunha/kicad-libs repository on GitHub, at the commit this page was made from: the board is examples/triac-out/triac-out.kicad_pcb and its schematic examples/debounce_button/debounce_button.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Triac out design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).