2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171
2 layers40 × 100 mm
PCB Design
RNA-IITPatna/Flight-Controller3Code related to flight controller for RNA's model rockets
- Size
- 40 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 34
- Pads
- 104
- Tracks, vias
- 198, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Jan 2026
- Updated
- 7 Mar 2026
Overview
PCB Design is an open-source printed circuit board by RNA-IITPatna, from the RNA-IITPatna/Flight-Controller repository on GitHub. It is a 2-layer board of 40 × 100 mm with 30 parts on 34 nets, routed with 198 tracks and 0 vias.
It is built around the ATMEGA328P-PU and L7805. Its parts include 14 connectors, 7 capacitors, 2 resistors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C4, C5, C6, C7 |
| 2 | 22nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2 |
| 2 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13, J14 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | 16MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 9V | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J12 |
| 1 | A2_3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | BMP - 280 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | D5_6_7 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | I2C_1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MPU - 6050 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | MicroSD Reader | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J11 |
| 1 | SEN - 0409 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | SPI_1 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J4 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
The 27 most common of 30 parts.
Questions
How big is the PCB Design PCB?
It measures 40 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Design use?
30 parts, built around the ATMEGA328P-PU and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Design KiCad files?
From the RNA-IITPatna/Flight-Controller repository on GitHub, at the commit this page was made from: the board is Version 1.0/PCB-Design/KiCAD Files/PCB-Design.kicad_pcb and its schematic Version 1.0/PCB-Design/KiCAD Files/PCB-Design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Design design in my own project?
Its repository states no licence, so its author keeps all rights: ask RNA-IITPatna before reusing the design.
Similar boards
- 2 layers20 × 110 mm
- 2 layers100 × 100 mm
Flipdot H Bridge
comakingspace/FlipDotDisplay
They were bought at the Makerfaire Hannover 2016.
76 parts3 - 2 layers60 × 60 mm
- 2 layers82 × 81 mm
- 2 layers55 × 485 mm
- 2 layers245 × 126 mm
- 2 layers102 × 152 mm
Aquabot ideal
arielcatli/aquabot-hardware
This project contains all the KiCAD files for the Aquabot project
22 parts