

PicoFanController
A small, quiet controller for a standard 4-wire PC fan, built around a Raspberry Pi Pico W. Designed for dual duty: solder-fume extractor on the bench, bedroom fan at night.
- Size
- 37.5 × 150 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 71
- Pads
- 249
- Tracks, vias
- 685, 69
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Apr 2026
- Updated
- 28 Apr 2026
Overview
PicoFanController is an open-source printed circuit board by rmpel, from the rmpel/PicoWFanController repository on GitHub. It is a 2-layer board of 37.5 × 150 mm with 57 parts on 71 nets, routed with 685 tracks and 69 vias.
Its parts include 15 resistors, 15 connectors, 3 capacitors, 2 transistors and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdPicoFanController
A small, quiet controller for a standard 4-wire PC fan, built around a Raspberry Pi Pico W. Designed for dual duty: solder-fume extractor on the bench, bedroom fan at night.
Control is by rotary encoder + push-button on the device itself, or over WiFi via a built-in web UI and REST API. A 10-segment LED bar shows the current speed at a glance.
Features
- 25 kHz PWM drive, tachometer read-back, configurable PWM polarity
- Rotary encoder with short-press, double-click and press-and-hold gestures
- Predefined / boost / min speeds, configurable step size
- 10-LED bar graph for speed, also used as WiFi-status indicator at boot
- WiFi client with AP fallback and captive-portal-style setup page
- REST API + responsive web UI (main + advanced settings pages)
- Settings persisted in on-device json storage
Repository layout
Firmware/— MicroPython firmware, web UI, install/deploy scriptsHARDWARE.md— schematic, PCB and bill of materialsPicoFanController.kicad_*— KiCad 9 project files
Getting started
- Build or assemble the hardware — see HARDWARE.md.
- Flash and configure the firmware — see Firmware/README.md.
License
The repo is split into two licenses, both noncommercial, both requiring attribution:
- Firmware and web UI (
Firmware/) — PolyForm Noncommercial 1.0.0. A software-specific noncommercial license. - Hardware design (schematic, PCB,
HARDWARE.md) — CC BY-NC-SA 4.0. Attribution, noncommercial, share-alike.
In short: do what you like with it for personal, educational or hobby use, credit the author, and share improvements under the same terms. For commercial use or anything that would involve claiming ownership, contact me first.
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 10 | Conn_01x05_Pin | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J6, J7, J8, J9, J10, J11, J12, J13, J14, J15 |
| 4 | 250 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5 |
| 3 | 362 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8 |
| 2 | 400 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13 |
| 2 | Si2302 A2SHB GSD | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 10K | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R11 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 1N5817 | Diode_THT:D_DO-15_P10.16mm_Horizontal | D1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 225 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Dell Fan | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | HDSP-4832_2 | Display:HDSP-4832 | BAR1 |
| 1 | Handwire from PiZero | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TP2+3 |
| 1 | IN+ | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm | BUCK1 |
| 1 | IN- | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm | BUCK4 |
| 1 | IP2721_MAX12 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | OUT+ | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm | BUCK2 |
| 1 | OUT- | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm | BUCK3 |
| 1 | Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Power Select | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | RaspberryPi_Pico_W | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7051x | J5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
Similar boards
- 2 layers59.2 × 52.9 mm

- 2 layers100 × 70.3 mm

- 2 layers165.1 × 120.7 mm

- 2 layers

- 2 layers121.1 × 104.7 mm

Sepia officinalis
tapioki/cephalopoda
Low profile split ergonomic mechanical keyboards
57 parts240GPL-3.0 - 2 layers100 × 96.5 mm

Keyboard ch32x-36-lhs
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
57 parts236 - 2 layers178 × 39 mm

AddOnA
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
57 parts226CC-BY-SA-4.0 - 2 layers58 × 110 mm

Questions
How big is the PicoFanController PCB?
It measures 37.5 × 150 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PicoFanController use?
57 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PicoFanController KiCad files?
From the rmpel/PicoWFanController repository on GitHub, at the commit this page was made from: the board is PicoFanController.kicad_pcb and its schematic PicoFanController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PicoFanController design in my own project?
Its repository states no licence, so its author keeps all rights: ask rmpel before reusing the design.