
HRU SCB M5Atom Entry
rmf-hru-wg/HRUServoController
UEC RMF HRU Servo Controller Board RP2040 ===

UEC RMF HRU Servo Controller Board RP2040 ===
HRU SCB RP2040 is an open-source printed circuit board by rmf-hru-wg, from the rmf-hru-wg/HRUServoController repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 42 × 55 mm with 51 parts on 40 nets, routed with 243 tracks and 0 vias.
It is built around the MAX485ED and R-78E3.3-0.5. Its parts include 24 switches, 8 resistors, 4 diodes, 4 connectors and 3 ICs. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | Conn_01x03_Pin | mymod:PinHeader_1x03_P2.54mm_Vertical_SmallCourtyard | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +8 |
| 4 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R9, R10 |
| 4 | 5.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R7, R8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1N4148 | Diode_THT:D_T-1_P5.08mm_Horizontal | D3, D4 |
| 2 | D_Zener_3V3 | Diode_THT:D_T-1_P5.08mm_Horizontal | D1, D2 |
| 2 | MAX485E | Package_DIP:DIP-8_W7.62mm_Socket | U1, U2 |
| 1 | 220u | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C1 |
| 1 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J4 |
| 1 | GROVE-CONNECTOR-DIP_4P-2.0_ | OPL_Connector:GROVE-HW4-2.0 | J3 |
| 1 | Pico_Socket_A | Module_RaspberryPi_Pico:RaspberryPi_Pico_PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | Pico_Socket_B | Module_RaspberryPi_Pico:RaspberryPi_Pico_PinSocket_1x20_P2.54mm_Vertical | J1 |
| 1 | R-78E3.3-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U3 |
| 1 | RaspberryPi_Pico_W | Module_RaspberryPi_Pico:RaspberryPi_Pico_W_Virtual | A1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
The 50 most common of 51 parts.

rmf-hru-wg/HRUServoController
UEC RMF HRU Servo Controller Board RP2040 ===


OpenModbus/OM-64DO
A compact industrial-grade 64-channel Modbus RTU output module.



rafkhan/lowstepper
Dual phase manipulation low frequency oscillator by Okay Synthesizer.


Th3Link/tanklevel
This project provides a solution for measuring the liquid level in tanks, such as rainwater tanks, using the TL-136 pressure sensor.

OpenModbus/OM-16LED
A compact industrial-grade 16-channel Modbus RTU LED driver.
It measures 42 × 55 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the MAX485ED and R-78E3.3-0.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rmf-hru-wg/HRUServoController repository on GitHub, at the commit this page was made from: the board is HRU-SCB-RP2040/HRU-SCB-RP2040.kicad_pcb and its schematic HRU-SCB-M5Atom-Entry/HRU-SCB-M5Atom-Entry.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).