Skip to the content
2 layers80 × 35.6 mmIrouette, the printed circuit board in 3D

IrouetteV2

Size
80 × 35.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
20
Pads
131
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
4 Dec 2018
Updated
14 Dec 2018

Overview

Irouette is an open-source printed circuit board by rletendu, from the rletendu/irouetteV2 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 80 × 35.6 mm with 32 parts on 20 nets.

It is built around the ESP32-WROOM-32, BMP180 and DW01, with the FS8205A, HT7333 and TP4056 among its other parts. Its parts include 10 resistors, 6 capacitors, 6 ICs, 4 diodes and 3 connectors. It belongs with the ESP32 boards of this library.

Main components

7

README

README.md

irouetteV2

Parts

32
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C4, C5, C6
4100kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR6, R8, R9, R10
3Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1, J2, J3
21MResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2
21N5818Diode_SMD:D_SMA_HandsolderingD2, D3
21kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR4, R7
11.2kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR3
1100Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR5
110uCapacitor_SMD:CP_Elec_3x5.4C3
1BMP180custom:BMP180U7
1DW01Package_TO_SOT_SMD:SOT-23-6_HandsolderingU4
1ESP32-WROOMcustom:esp32_wroomU5
1FS8205APackage_SO:TSSOP-8_4.4x3mm_P0.65mmU3
1HT7333Package_TO_SOT_SMD:SOT-89-3_HandsolderingU1
1JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1LED_VCC33_PERLED_SMD:LED_0805_2012MetricD4
1PMOS_SI2302Package_TO_SOT_SMD:SOT-23Q1
1SI2301Package_TO_SOT_SMD:SOT-23Q2
1TL431LPPackage_TO_SOT_SMD:SOT-23D1
1TP4056Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mmU2

Similar boards

  • 2 layers159 × 140.1 mmPhazor, the printed circuit board in 3D

    Phazor

    skrmsh/skirmish-hardware

    Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/

    123 parts10
  • 2 layers45.3 × 45 mmIAQ Project, the printed circuit board in 3D

    IAQ Project

    fjuliofontes/esp32-iaq-sensor

    Bosch Sensortec BME680 Indoor-air-quality monitor based

    40 parts
  • 2 layers80 × 58 mmRadio 2, the printed circuit board in 3D

    Radio 2

    Shya-Bubu/pocket-fm-radio

    This repository contains the complete design and documentation for an FM Pocket Radio project, developed as part of the EE2050 Design Principles and Manufacturing Technologies module at the University of Peradeniya…

    58 parts
  • 2 layersCharger stepup, the printed circuit board in 3D

    Charger stepup

    Aplyard/Oled-Clicker

    Clicker Counter for Arduino Nano

    19 parts117BSD-3-Clause
  • 2 layers84 × 98 mmJoule Chief, the printed circuit board in 3D

    Joule Chief

    fishPointer/Joule-Thief

    I teach myself new skills by designing projects that require to develop the skills I want in order to complete them.

    93 parts25MIT
  • 2 layers32 × 32 mmTuxmini v03, the printed circuit board in 3D

    Tuxmini v03

    tux-friend/tux-cube

    Physics Sensor Cube Tux³

    83 parts18GPL-3.0
  • 2 layers80 × 25 mmLedGateController, the printed circuit board in 3D

    LedGateController

    Knifa/ws28xx-led-driver

    A straightforward DIY WS28xx LED driver.

    73 parts3
  • 2 layers80 × 50 mmIguana V1, the printed circuit board in 3D

    Iguana V1

    iowlabs/Iguana

    Repositorio para proyecto Iguana IOWLabs (Cultivo)

    120 parts1

Questions

How big is the Irouette PCB?

It measures 80 × 35.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Irouette use?

32 parts, built around the ESP32-WROOM-32, BMP180, DW01 and FS8205A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Irouette KiCad files?

From the rletendu/irouetteV2 repository on GitHub, at the commit this page was made from: the board is hardware/irouette.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Irouette design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).