

6502board
Another 65c02 hobby computer
- Size
- 35 × 103 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 95
- Pads
- 298
- Tracks, vias
- 1,479, 242
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Jan 2023
- Updated
- 22 Jan 2023
Overview
6502board is an open-source printed circuit board by rkujawa, from the rkujawa/65c02board repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 35 × 103 mm with 37 parts on 95 nets, routed with 1,479 tracks and 242 vias.
It is built around the PCA9665PW, 74LVC1GU04DRL and 74LVC138AD, with the 74LVC139D, MAX7375AXR405+T and MAX811SEUS-T among its other parts. Its parts include 11 ICs, 10 capacitors, 8 resistors, 5 connectors and 1 diode.
Main components
6PCA9665PW
TSSOP-20-40℃~+85℃ 1Mbps 2.3V~3.6V I2C Interrupt generation TSSOP-20 Interface - Specialized ROHSNXP SemiconductorsInterface - Specialized74LVC1GU04DRL
-- Logic Gates ROHSTexas InstrumentsLogic Gates74LVC138AD
-- Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, Decoders74LVC139D
SO-16-40℃~+125℃ 0.1uA 1.65V~3.6V 2.5ns@3.3V,50pF 74LVC Decoder SO-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / MultiplexersMAX7375AXR405+T
SC-70-40℃~+125℃ 1.7mA 2.7V~5.5V 4MHz CMOS SC-70 Programmable Oscillators ROHSMaxim Integrated (Analog Devices)Programmable OscillatorsMAX811SEUS-T
SOT-23-4-40℃~+85℃@(TA) 1 1.2V~5.5V 140ms 2.93V Active Low Manual reset input Push-pull Voltage monitor SOT-23-4 Supervisor and Reset ICsonsemiSupervisor And Reset ICs
README
README.md65c02board
Another 65c02 hobby computer
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C6, C7, C8, C9, C10 |
| 5 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 2 | 1.8k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8 |
| 2 | 74LVC1GU04DRL | Package_TO_SOT_SMD:SOT-553 | U11, U12 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J_Pad1.25x1.05mm_HandSolder | C4 |
| 1 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J_Pad1.25x1.05mm_HandSolder | C5 |
| 1 | 47 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 74LVC138A | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U7 |
| 1 | 74LVC139 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_Vertical | J2 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | IS61LV256AL | Package_SO:TSOP-I-28_11.8x8mm_P0.55mm | U2 |
| 1 | LT1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | MAX7375AXR405 | Package_TO_SOT_SMD:SOT-323_SC-70 | U6 |
| 1 | MAX811SEUS-T | Package_TO_SOT_SMD:SOT-143 | U4 |
| 1 | PCA9665 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U9 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Power LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | Serial | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J4 |
| 1 | Serial clock source | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Spare CS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | TL16C750E | Package_QFP:TQFP-48_7x7mm_P0.5mm | U10 |
| 1 | W65C02S6TQG | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
Similar boards
- 2 layers

- 2 layers68.6 × 53.3 mm

Gowinduino
SushiBits/Gowinduino
Arduino-compatible evaluation board with Gowin GW1NSR-4C FPGA
86 parts8 - 2 layers99.9 × 99.9 mm

- 2 layers65 × 56 mm

- 2 layers160 × 114.3 mm

VGAGAL
flypie/Ace-2019
Reimplimentation of the Jupiter ACE with slightly more modern hardware. https://www.jupiter-ace.co.uk/ the KiCad versions are the up to date designs which are available at https://jupiterdeuce.blogspot.com and…
77 parts13GPL-3.0 - 4 layers76.8 × 54 mm

- 2 layers104 × 46 mm

RC2014-512K RAMROM V2
dennisperry/RC2014_PCBs
A group of RC2014 PCBs I've designed to expand my system
17 parts - 4 layers223.3 × 120.1 mm

ISA FPGA v2
robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.
132 parts78
Questions
How big is the 6502board PCB?
It measures 35 × 103 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 6502board use?
37 parts, built around the PCA9665PW, 74LVC1GU04DRL, 74LVC138AD and 74LVC139D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 6502board KiCad files?
From the rkujawa/65c02board repository on GitHub, at the commit this page was made from: the board is schematics/6502board.kicad_pcb and its schematic schematics/6502board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 6502board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).