

Parc
Repository for code experiments and smaller projects.
- Size
- 124.5 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 44
- Pads
- 121
- Tracks, vias
- 86, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jul 2020
- Updated
- 4 Jul 2021
Overview
Parc is an open-source printed circuit board by rjacoby00, from the rjacoby00/devel repository on GitHub. It is a 2-layer board of 124.5 × 43.2 mm with 23 parts on 44 nets, routed with 86 tracks and 3 vias.
It is built around the IRLB3034PBF. Its parts include 6 resistors, 5 ICs, 5 connectors and 3 transistors.
Main components
1README
README.mdDevel
Ryan Jacoby
This is a repository full of random bits of code I have written for various assingments, projects, and classes over time. Some of the code I am not allowed to share and has been omited due to it being private, a homework solution, copyrighted code that I cannot distribute, or secret/classified information. If you have any questions or need to see something that you think might have been redacted, feel free to email me at rjacoby00@icloud.com.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | XT30 | parc:XT30 | J1, J2, J3, J4, J5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R5 |
| 3 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R6 |
| 3 | IRLB3034PBF | Digikey Footprints:TO-220-3 | Q1, Q2, Q3 |
| 1 | BMP388_Breakout | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | U4 |
| 1 | BNO055_Breakout | parc:BNO055_Breakout | U5 |
| 1 | FeatherAdaloggerM0 | parc:Feather | U3 |
| 1 | HC06 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U1 |
| 1 | MPM3610 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U2 |
More from rjacoby00/devel
3- 4 layers44.6 × 31.8 mm

- 4 layers94 × 91.4 mm

- 2 layers59.7 × 49.5 mm

Similar boards
- 2 layers

Morpheus kicad
pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
66 parts80GPL-3.0 - 4 layers112 × 90 mm

Nova pcb v6 power v2
Ace2932/Fennec
This project is a heavily modified fork of the open-source NovaSM3 quadruped, redesigned to serve as a research platform for embodied AI.
61 parts1MIT - 2 layers105.4 × 63.5 mm

ArenaPCBv1
AMLing2/MAS306_Drone_G12
This repository was created for use with the bachelor thesis 2024, for the following members: Thomas Lønne Stiansen Adrian Mathias Lervik Ling Jan Laksesvela Haugstad
29 parts1 - 4 layers122 × 82 mm

Ironerae cant ilever
ironerae/cant-ilever-Board
A custom DIY 3D printer mainboard powered by the Raspberry Pi Pico (RP2040), designed for ironerae cant-ilever 3D printer.
63 parts1 - 4 layers125 × 91 mm

Ironerae cant ilever
ironerae/cant-ilever-Board-V2
The V2 iteration of the previous custom 3D printer mainboard powered by the Raspberry Pi Pico (RP2040)
110 parts - 2 layers74 × 80 mm

- 2 layers98.4 × 44.5 mm

REM-4.0
mekanii/ESU
Below is the output scope from the sense circuit, where the pad resistance values are 5Ω, 200Ω, 1kΩ, and High Impedance.
33 parts - 2 layers65 × 56 mm

Questions
How big is the Parc PCB?
It measures 124.5 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Parc use?
23 parts, built around the IRLB3034PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Parc KiCad files?
From the rjacoby00/devel repository on GitHub, at the commit this page was made from: the board is hardware/parc/parc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Parc design in my own project?
Its repository states no licence, so its author keeps all rights: ask rjacoby00 before reusing the design.