
ArenaPCBv2
AMLing2/MAS306_Drone_G12
This repository was created for use with the bachelor thesis 2024, for the following members: Thomas Lønne Stiansen Adrian Mathias Lervik Ling Jan Laksesvela Haugstad

This repository was created for use with the bachelor thesis 2024, for the following members: Thomas Lønne Stiansen Adrian Mathias Lervik Ling Jan Laksesvela Haugstad
ArenaPCBv1 is an open-source printed circuit board by AMLing2, from the AMLing2/MAS306_Drone_G12 repository on GitHub. It is a 2-layer board of 105.4 × 63.5 mm with 29 parts on 33 nets, routed with 302 tracks and 13 vias.
It is built around the S12GCH and IRLB3034PBF. Its parts include 9 connectors, 6 capacitors, 4 resistors, 2 ICs and 2 diodes.
This repository was created for use with the bachelor thesis 2024, for the following members:
Thomas Lønne Stiansen Adrian Mathias Lervik Ling Jan Laksesvela Haugstad

Video from BSc. thesis, edited by Thomas Lønne Stiansen:
https://youtu.be/jgXzDRpN-2Y?si=vNdUQDb9o-jMdF8C
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2_DIN965_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | M.2, M.2, M.2, M.2 |
| 2 | 100nF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C4, C5 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_6.3x4.5 | C3, C6 |
| 2 | 2K2 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2, R3 |
| 2 | S12GCH | 2_Bachelors_footprints:S12GCH | D1, D2 |
| 2 | ~ | Module:Pololu_Breakout-16_15.2x20.3mm | U1, U2 |
| 2 | ~ | 2_Bachelors_footprints:CONN_B4B-ZRLFSN_JST | J2, J4 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_10x10.5 | C2 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_10x10.5 | C1 |
| 1 | 330R | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R4 |
| 1 | 3K3 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1 |
| 1 | IRLB3034 | 2_Bachelors_footprints:IRF520N | Q1 |
| 1 | MF-RG650-0 | Fuse:Fuse_Bourns_MF-RG650 | F1 |
| 1 | ~ | Connector_JST:JST_PHD_B16B-PHDSS_2x08_P2.00mm_Vertical | J9 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | ~ | 2_Bachelors_footprints:LP127 | J6 |
| 1 | ~ | 2_Bachelors_footprints:CONN_B6B_VH_JST | J8 |
| 1 | ~ | 2_Bachelors_footprints:conn2_1-1123723-2_TEC | J1 |
| 1 | ~ | 2_Bachelors_footprints:CONN_B2B-ZRLFSN_JST | J3 |
| 1 | ~ | 2_Bachelors_footprints:CONN_B4P-VH_JST | J7 |

AMLing2/MAS306_Drone_G12
This repository was created for use with the bachelor thesis 2024, for the following members: Thomas Lønne Stiansen Adrian Mathias Lervik Ling Jan Laksesvela Haugstad

pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec

Ace2932/Fennec
This project is a heavily modified fork of the open-source NovaSM3 quadruped, redesigned to serve as a research platform for embodied AI.

ironerae/cant-ilever-Board
A custom DIY 3D printer mainboard powered by the Raspberry Pi Pico (RP2040), designed for ironerae cant-ilever 3D printer.

ironerae/cant-ilever-Board-V2
The V2 iteration of the previous custom 3D printer mainboard powered by the Raspberry Pi Pico (RP2040)


mekanii/ESU
Below is the output scope from the sense circuit, where the pad resistance values are 5Ω, 200Ω, 1kΩ, and High Impedance.


gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
It measures 105.4 × 63.5 mm and has 2 copper layers, 1.67 mm thick.
29 parts, built around the S12GCH and IRLB3034PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AMLing2/MAS306_Drone_G12 repository on GitHub, at the commit this page was made from: the board is CircuitDesign/arenaPCBv1/arenaPCBv1.kicad_pcb and its schematic CircuitDesign/arenaPCBv1/arenaPCBv1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AMLing2 before reusing the design.