

C816Pro
Modern 8 bit computer
- Size
- 159.9 × 119.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 154
- Nets
- 290
- Pads
- 921
- Tracks, vias
- 2,393, 223
- Pours
- 422
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 19 Apr 2026
- Updated
- 20 May 2026
Overview
C816Pro is an open-source printed circuit board by rjacobs1969, from the rjacobs1969/C816 repository on GitHub. It is a 4-layer board of 159.9 × 119.3 mm with 154 parts on 290 nets, routed with 2,393 tracks and 223 vias.
It is built around the 74AHCT245D, 74LVCH245AD and 74LVC07AD, with the W25Q128JVSIQ, CY7C1049G-10VXI and SP720APP among its other parts. Its parts include 33 resistors, 27 connectors, 21 capacitors, 17 ICs and 2 diodes.
Main components
874AHCT245D
SOIC-20-300mil-40℃~+125℃ 1 11ns@5.5V,50pF 4.5V~5.5V 74AHCT 8 80uA 8mA 8mA Bidirectional TTL-compatible CMOS Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74LVCH245AD
SO-20-300mil-40℃~+125℃ 1.2V~3.6V 2.9ns@3.3V,50pF 24mA 24mA 40uA 74LVCH 8 Bidirectional Tri-State SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver74LVC07AD
SOP-14-40℃~+125℃ Buffers Open-drain Power-off protection、Output enable high-impedance TTL SOP-14 Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, TransceiversW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHCY7C1049G-10VXI
SOJ-36-40℃~+85℃ 10ns 4.5V~5.5V 45mA 4Mbit 8mA Parallel Port (Parallel) BSOJ-36 SRAM ROHSInfineon TechnologiesSRAMSP720APP
PDIP-16-40℃~+105℃ 3A@8/20us 3pF 5nA IEC 61000-4-2 TVS PDIP-16 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)SN74LVC8T245PW
TSSOP-24-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 8 Bidirectional CMOS CMOS Tri-State TSSOP-24 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersSP721APP
PDIP-8ESD And Surge Protection (TVS/ESD)Littelfuse
README
README.mdC816
Parts
154| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | NetTie_2 | FPGA AND STUFF:MyNetTie-2_SMD_Pad0.25mm | NT23, NT24, NT25, NT26, NT27, NT28, NT29, NT30, NT31, NT32, NT33, NT34, NT35, NT36, NT37, NT38 +23 |
| 20 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 +4 |
| 17 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8, R10, R11, R12, R13, R14, R18, R22, R23, R27, R28, R29, R30, R31, R32 +1 |
| 5 | 3K3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6, R15, R16, R34 |
| 4 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J2, J6, J7, J8 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | H5, H6, H7, H8 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R17 |
| 3 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R24, R33 |
| 3 | 74AHCT245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U8, U12, U13 |
| 3 | 74LVCH245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U9, U10, U11 |
| 3 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J14, J15, J19 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26 |
| 2 | 74LVC07 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4, U7 |
| 2 | CY7C1049G-10VXI | Package_SO:SOJ-36_10.16x23.495mm_P1.27mm | U2, U3 |
| 2 | Conn_01x07_Pin | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J22, J23 |
| 2 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1, J3 |
| 2 | DE9_Pins | Connector_Dsub:DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mm | J5, J9 |
| 2 | NYS354 | PS2:NYS354 | J26, J27 |
| 2 | R_Network10 | Resistor_THT:R_Array_SIP11 | RN1, RN2 |
| 2 | SP720APP | Package_DIP:DIP-16_W7.62mm_Socket | IC1, IC3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 5749265-1 | PS2:57492651 | J10 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D13.0mm_P7.50mm | C21 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J25 |
| 1 | Conn_01x03_Pin | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels | J13 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J16 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J20 |
| 1 | Conn_01x09 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J17 |
| 1 | Conn_01x09_Socket | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J24 |
| 1 | Conn_02x06_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J11 |
| 1 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J12 |
| 1 | D_Zener | Diode_THT:D_5W_P12.70mm_Horizontal | D2 |
| 1 | Fuse | Fuse:Fuse_2920_7451Metric | F1 |
| 1 | LED | LED_THT:LED_D5.0mm_Horizontal_O6.35mm_Z3.0mm | D1 |
| 1 | LTC6905xS5-100 | Package_TO_SOT_SMD:TSOT-23-5 | Y1 |
| 1 | Polyfuse | Fuse:Fuse_Bourns_MF-RHT300 | F2 |
| 1 | R_Network06 | Resistor_THT:R_Array_SIP7 | RN3 |
| 1 | SD_Card_Receptacle | Connector_Card:SD_TE_2041021 | J21 |
| 1 | SN74LVC8T245 | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U5 |
| 1 | SP721APP | Package_DIP:DIP-8_W7.62mm_Socket | IC2 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Piano_10.8x11.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | USB_A_Stacked | Connector_USB:USB_A_Wuerth_61400826021_Horizontal_Stacked | J4 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J18 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U14 |
| 1 | W65C22NxP | Package_DIP:DIP-40_W15.24mm | U6 |
| 1 | W65C816SxP | Package_DIP:DIP-40_W15.24mm | U1 |
More from rjacobs1969/C816
3- 6 layers160 × 101.4 mm

- 6 layers99.9 × 99.9 mm

- 4 layers159.6 × 96.5 mm

Similar boards
- 4 layers100 × 100 mm

- 4 layers11.8 × 27.6 mm

Bmdc ram interposer
arsenixprime/dx32_hacking
LinuxCNC conversions for Bridgeport DX32 CNC machines
10 parts1 - 6 layers304.8 × 243.8 mm

- 2 layers148.1 × 86.8 mm

- 2 layers65 × 54.1 mm

Tang 41464 tester
vanpit/Tang-20K-41464-DRAM-tester
Project to test 41464 DRAMs used with MSX VDP 9938 and 9958.
39 parts1MIT - 4 layers100.9 × 77.5 mm

Ym2610-pcb
dan-rodrigues/ym2610-pcb
FPGA-based PCB to control a YM2610 sound synthesis chip.
168 parts31 - 2 layers45.1 × 29.2 mm

- 4 layers166.3 × 70 mm

Ganglia
H2O-Tnp/ganglia
Ganglia is an open BLDC / brushed motor driver platform — custom PCB hardware plus STM32 firmware that runs a real-time control loop on top of FreeRTOS.
202 parts
Questions
How big is the C816Pro PCB?
It measures 159.9 × 119.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the C816Pro use?
154 parts, built around the 74AHCT245D, 74LVCH245AD, 74LVC07AD and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C816Pro KiCad files?
From the rjacobs1969/C816 repository on GitHub, at the commit this page was made from: the board is Hardware/Kicad/C816Pro/C816Pro.kicad_pcb and its schematic Hardware/Kicad/C816Classic/C816Classic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the C816Pro design in my own project?
Its repository states no licence, so its author keeps all rights: ask rjacobs1969 before reusing the design.