2 layers93 × 48.3 mm
2 layers55 × 25 mm
Automatic Light Control Using LDR Sensor
rizallmaarif/Automatic-Light-Control-Using-LDR-Sensor- Size
- 55 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 11
- Pads
- 30
- Tracks, vias
- 67, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Aug 2024
- Updated
- 8 Aug 2024
Overview
Automatic Light Control Using LDR Sensor is an open-source printed circuit board by rizallmaarif, from the rizallmaarif/Automatic-Light-Control-Using-LDR-Sensor repository on GitHub. It is a 2-layer board of 55 × 25 mm with 13 parts on 11 nets, routed with 67 tracks and 0 vias.
It is built around the LM358PE3 and BC337. Its parts include 3 resistors, 1 IC and 1 transistor. It belongs with the sensors and measurement boards of this library.
Main components
2Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5.1K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1, R2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | INPUT, OUTPUT |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R3 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | LM358PE3 | LM358PE3:DIP794W45P254L959H508Q8 | U1 |
| 1 | ~ | OptoDevice:R_LDR_5.0x4.1mm_P3mm_Vertical | LDR1 |
The 9 most common of 13 parts.
Questions
How big is the Automatic Light Control Using LDR Sensor PCB?
It measures 55 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Automatic Light Control Using LDR Sensor use?
13 parts, built around the LM358PE3 and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Automatic Light Control Using LDR Sensor KiCad files?
From the rizallmaarif/Automatic-Light-Control-Using-LDR-Sensor repository on GitHub, at the commit this page was made from: the board is Automatic Light Control Using LDR Sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Automatic Light Control Using LDR Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask rizallmaarif before reusing the design.
Similar boards
- 2 layers74.5 × 44.5 mm
PeripheralBoard
rhit-bouchemj/AnesthesiaSeniorDesign
The Repo for Senior Design project of creating an Open-Source Anesthesia Pump
7 parts - 2 layers50 × 25 mm
Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223 - 2 layers118 × 103.5 mm
- 2 layers28.7 × 81.3 mm
- 2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers56.6 × 57.7 mm
TashTwenty Tiny
lampmerchant/tashtwenty
An interface for the DCD protocol used by Apple's Hard Disk 20.
31 parts35GPL-3.0