

RecordFlipper PCB
But each side of a 12 inch LP can only store about 20 minutes of music, and I don't necessarily love having to get up to flip the record often. I just wish that, after I put the record on, it would play the entire album.
- Size
- 88.9 × 78.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 52
- Pads
- 150
- Tracks, vias
- 281, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Apr 2025
- Updated
- 3 Dec 2025
Overview
RecordFlipper PCB is an open-source printed circuit board by riyaanjain, from the riyaanjain/VinylRecordFlipper_PCB repository on GitHub. It is a 2-layer board of 88.9 × 78.7 mm with 34 parts on 52 nets, routed with 281 tracks and 25 vias.
It is built around the ESP32-S3-WROOM-1-N16R2, A1326LUA-T and SS8050-G, with the SP0503BAHTG among its other parts. Its parts include 7 resistors, 6 capacitors, 6 connectors, 2 diodes and 2 transistors. It belongs with the ESP32 boards of this library.
Main components
4ESP32-S3-WROOM-1-N16R2
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SDIO、SPI、I2C、GPIO、PWM、ADC、I2S、JTAG、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesA1326LUA-T
TO-92S-40℃~+150℃ 2.5mV/Gs 5V~5.5V 6.9mA ±0%/℃ ±1.5% TO-92S Linear Hall Sensors ROHSAllegro MicroSystems, LLCHall SensorSS8050-G
SOT-231 NPN 1.5A 100 100MHz 100nA 25V 300mW 400mV 5V NPN SOT-23 Bipolar (BJT) ROHSComchipBipolar (BJT)SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.md🎵 Automatic Vinyl Record Flipper
I love vinyl records.
But each side of a 12 inch LP can only store about 20 minutes of music, and I don't necessarily love having to get up to flip the record often. I just wish that, after I put the record on, it would play the entire album.
So, we took matters into our own hands and built an automatic vinyl record flipper.
Included are:
- PCB Design Files
- The program code
- A picture and video for your enjoyment (have to download the video from Image_and_Video folder🥲)
- Design Document
Hopefully you enjoy it as much as I did!
🧠 What It Does
This device automatically flips a vinyl record by sending PWM signals to servo motors using an ESP32 microcontroller. It detects the tonearm rest position using a Hall effect sensor, then triggers the motors to lift, rotate, and drop the record back down.
🖼️ Project Gallery
🔧 PCB Preview

📸 Final Project Photo

Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 24.243.1 | 24.243.1:242431 | J4, J5 |
| 2 | Conn_01x05_Female | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J6 |
| 2 | SS8050-G | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1, SW2 |
| 2 | Voltage Regulator Module | digikey-footprints:TO-92-3 | LP2950CZ1-TO-1, LP2950CZ1-TO-2 |
| 1 | 1000 Ohm | Resistor_SMD:R_0805_2012Metric | Resistor1 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | Conn_01x09_Female | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | DIODE | digikey-footprints:LED_5mm_Radial | LED1 |
| 1 | ESP32-S3-WROOM-1-N16R2 | local_footprints:ESP32-S3-WROOM-1_EXP | U1 |
| 1 | Hall Effect Sensor | SS49E:TO92127P460H470-3 | HAL214UA-E1 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
Similar boards
- 2 layers57.3 × 79.5 mm

- 2 layers65.9 × 44 mm

- 2 layers95 × 53.1 mm

Shematic for power and light system
jasmehar/Smart_motorcycle_helmet
Design report until i get the notebook
35 parts - 2 layers56.6 × 70 mm

- 2 layers89 × 45 mm

MonitoringSystem PCB
Danielbaker31/HouseholdWaterMonitoringSystem
This is a personal side project created by Daniel, Advait, and Jack. It is a household water monitoring system, allowing households to track how much water they are using, and pinpoint from which source it is coming…
96 parts - 2 layers96.5 × 58.7 mm

JargonJolt
lgkh2002/ECE445
This is the Git repository for the JargonJolt ECE445 project by Daniel Chamoun, Luke Hartmann, and Nan Kang.
75 parts - 2 layers49.6 × 101 mm

- 4 layers60 × 40 mm

RCcar
jeffreydthompson/Open_Roadster
Support files for course creating BLE remote controlled car from scratch.
95 parts1
Questions
How big is the RecordFlipper PCB PCB?
It measures 88.9 × 78.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RecordFlipper PCB use?
34 parts, built around the ESP32-S3-WROOM-1-N16R2, A1326LUA-T, SS8050-G and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RecordFlipper PCB KiCad files?
From the riyaanjain/VinylRecordFlipper_PCB repository on GitHub, at the commit this page was made from: the board is PCB_Design/RecordFlipper_PCB.kicad_pcb and its schematic PCB_Design/RecordFlipper_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RecordFlipper PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask riyaanjain before reusing the design.