2 layers118.1 × 101.6 mm
Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
102 parts259MIT
2 layers137.5 × 137.5 mm
PowerBoard
rishivg/EOH-Robot-PCB3EOH Robot PCB boards
- Size
- 137.5 × 137.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 65
- Pads
- 172
- Tracks, vias
- 292, 100
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Feb 2024
- Updated
- 11 Dec 2024
Overview
PowerBoard is an open-source printed circuit board by rishivg, from the rishivg/EOH-Robot-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 137.5 × 137.5 mm with 23 parts on 65 nets, routed with 292 tracks and 100 vias.
It is built around the TEENSY 4.1. Its parts include 10 connectors, 3 ICs, 1 resistor and 1 diode. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
1README
README.mdEOH-Robot-PCB
EOH Robot PCB boards
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x04_Pin | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J101, J102, J103, J104 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J105, J106 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J108, J109 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R104 |
| 1 | 2472 | Breakouts_ISS:MODULE_2472 | U104 |
| 1 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J107 |
| 1 | D24V50F5 | Regulator_Module_Pololu:D24V50F5 | U103 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D101 |
| 1 | LOGO | memes:pancakes | G*** |
| 1 | LOGO | memes:weedies2 | G*** |
| 1 | LOGO | memes:enumclaw_70mm | G*** |
| 1 | LOGO | memes:Amogus | G*** |
| 1 | LOGO | memes:300parasangstall_teensy | G*** |
| 1 | Teensy4.1 | MCU_Teensy:Teensy41_bare_pins | U101 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A | J110 |
Questions
How big is the PowerBoard PCB?
It measures 137.5 × 137.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerBoard use?
23 parts, built around the TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerBoard KiCad files?
From the rishivg/EOH-Robot-PCB repository on GitHub, at the commit this page was made from: the board is PowerBoard.kicad_pcb and its schematic PowerBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerBoard design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers240 × 240 mm
- 2 layers304.8 × 170.8 mm
- 2 layers66.5 × 36.5 mm
- 2 layers312 × 140 mm
- 2 layers316 × 119 mm
Teensy Grovebox
jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1
142 parts150MIT - 2 layers304.8 × 95.2 mm
LMN
FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project
106 parts106CC-BY-SA-4.0 - 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66