Skip to the content
2 layers77 × 77 mmElektroniikkapaja, the printed circuit board in 3D

Aalto University’s ELEC-8701 Elektronics workshop course's repository for Axel Soderberg, Roope Jaskari and Kalle Aro

Size
77 × 77 mm
Copper layers
2
Thickness
1.6 mm
Parts
76
Nets
73
Pads
251
Tracks, vias
667, 173
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
9 Sep 2024
Updated
29 Dec 2024

Overview

Elektroniikkapaja is an open-source printed circuit board by ripaskajaska, from the ripaskajaska/Wireless-weather-station repository on GitHub. It is a 2-layer board of 77 × 77 mm with 76 parts on 73 nets, routed with 667 tracks and 173 vias.

It is built around the ATMEGA644-20AU, SN74LS07N and DS18S20, with the SSM3J371R,LF among its other parts. Its parts include 22 capacitors, 21 resistors, 8 connectors, 7 ICs and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

README.md

Wireless-weather-station

Aalto University’s ELEC-8701 Elektronics workshop courses repository for Axel Soderberg, Roope Jaskari and Kalle Aro

Basic git usage for this project:

Sections 1 to 2 are done on the command line

1. Initialization

If you don't have an ssh key yet follow the instruction in this link Add this ssh key to your GitHub SSH keys and proceed.

clone project

text
git clone git@github.com:<yourusername>/Wireless-weather-station.git

Go to the cloned repository > "Wireless-weather-station" (default name)

Make your own branch

text
git branch <your own branch name here>
text
git checkout <your own branch name here>

2. Working with git

When you want to commit something, first check out the changes you have made.

text
git status

After this add the files you'd like to commit

text
git add <your file/folder in the git initialized folder>

Commit

text
git commit -m "<your required message here>"

And if this is your first push to the git repository use this to also set your upstream:

text
git push --set-upstream origin

Otherwise:

text
git push

3. Merging with main

After a successful commit and push, if you'd like to begin a merge request with your branch and the main branch, navigate to your branch in GitHub from this dropdown:

image

And then make a pull request here:

Screenshot 2024-10-20 at 23 57 30

After this, notify the other contributors about the pull request in order to get their approval on the matter. Success!

In addition one can delete their own branch from the GitHub to start a new addition to the project from a clean table.

DO NOT TRY TO DELETE THE MAIN BRANCH!

Parts

76
QtyValueFootprintReferences
64k7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R16, R18, R19, R20, R21
5100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4, C10, C17, C21, C22
410uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6, C7, C13, C20
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
31kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R5, R6
31uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC11, C12, C15
218pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8, C9
21nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC14, C16
222pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
22k2Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R17
24.7uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC18, C19
2LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D3
2SSM3J371RPackage_TO_SOT_SMD:SOT-23-3Q1, Q2
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
110pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5
110uHinductor_footprint:WE-PD2_1054L3
1150kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR13
1150rResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
1160kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD4
1300kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR14
1330rResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15
14.7pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
1470nFInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL2
15.1V ZenerDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2
1680mohmResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7
168kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
182nHInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1
1ATmega644-20APackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1AVR-ISP-6Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ9
1Battery_CellBattery:BatteryHolder_MPD_BH-18650-PC2BT1
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3
1Conn_01x07_SocketConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ5
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ7
1Conn_CoaxialConnector_Coaxial:SMA_Amphenol_901-143_HorizontalJ1
1Crystal 13.56MHzCrystal:Crystal_HC49-U_VerticalY2
1Crystal 16MHzCrystal:Crystal_HC49-U_VerticalY1
1DS18S20Package_TO_SOT_THT:TO-92_InlineU5
1MCP1700x-330xxTOPackage_TO_SOT_THT:TO-92_InlineU4
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U6
1Micrf113Package_TO_SOT_SMD:SOT-23-6_HandsolderingU3
1RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR11
1R_PhotoResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR12
1SN74LS07NPackage_DIP:DIP-14_W7.62mmU7
1SW_PushButton_Switch_SMD:SW_SPST_TL3305ASW_reset1
1SW_SPDTButton_Switch_THT:SW_CuK_JS202011CQN_DPDT_StraightSW1
1Solar_panel_connectorConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ8
1~Package_SO:TSSOP-8_4.4x3mm_P0.65mmU2

More from ripaskajaska/Wireless-weather-station

1
  • 2 layers77 × 77 mmElektroniikkapaja vastaanotin, the printed circuit board in 3D

    Elektroniikkapaja vastaanotin

    ripaskajaska/Wireless-weather-station

    Aalto University’s ELEC-8701 Elektronics workshop course's repository for Axel Soderberg, Roope Jaskari and Kalle Aro

    62 parts

Similar boards

  • 2 layersTT Clone AY AT, the printed circuit board in 3D

    TT Clone AY AT

    Upcycle-Electronics/AVR-Transistor-Tester

    60 parts47
  • 4 layers70 × 34 mmSpeedo, the printed circuit board in 3D

    Speedo

    gpgreen/speedometer_hardware

    KiCAD project for digital speedometer project

    53 parts
  • 2 layers95.2 × 67.5 mmPowMetV2.2, the printed circuit board in 3D

    PowMetV2.2

    aleksejm/6xUSB-Power-Meter

    6 USB port Power Meter

    161 parts7
  • 2 layers90 × 65 mmATMega64 AD9850, the printed circuit board in 3D

    ATMega64 AD9850

    ra3xdh/TRX_RA3XDH_v2

    My HF transceiver project, PCBs and schematics

    118 parts2
  • 2 layers50 × 49.4 mmSD2IECplug, the printed circuit board in 3D

    SD2IECplug

    schenkmi/electronic-retro-computing-projects

    In revision 2, the PCB size has been reduced by more than 50% and TAPuino support has been ditched. It now features a Micro SD slot and a few other improvements.

    49 parts
  • 4 layers52.5 × 59.7 mmESPHome Indoor Multi Sensor, the printed circuit board in 3D

    ESPHome Indoor Multi Sensor

    mikelawrence/esphome-indoor-multi-sensor-hardware

    ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

    113 parts14CERN-OHL-P-2.0
  • 2 layers65 × 56 mmRPi Hat Thermocouple, the printed circuit board in 3D

    RPi Hat Thermocouple

    mikelawrence/RPi-Hat-Thermocouple

    Raspberry Pi Thermocouple Hat

    46 parts9MIT
  • 2 layers65 × 30 mmRPi pHat Thermocouple, the printed circuit board in 3D

    RPi pHat Thermocouple

    mikelawrence/RPi-pHat-Thermocouple

    Raspberry Pi Thermocouple pHat

    59 parts7MIT

Questions

How big is the Elektroniikkapaja PCB?

It measures 77 × 77 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Elektroniikkapaja use?

76 parts, built around the ATMEGA644-20AU, SN74LS07N, DS18S20 and SSM3J371R,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Elektroniikkapaja KiCad files?

From the ripaskajaska/Wireless-weather-station repository on GitHub, at the commit this page was made from: the board is KiCad_projekti/Elektroniikkapaja-lähetin/Elektroniikkapaja.kicad_pcb and its schematic KiCad_projekti/Elektroniikkapaja-lähetin/Elektroniikkapaja.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Elektroniikkapaja design in my own project?

Its repository states no licence, so its author keeps all rights: ask ripaskajaska before reusing the design.