

BoardRev1
Senior Design Project - Class of 2024
- Size
- 69.6 × 49.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 65
- Pads
- 200
- Tracks, vias
- 584, 70
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Jan 2024
- Updated
- 29 Apr 2024
Overview
BoardRev1 is an open-source printed circuit board by richardmcmanusjr, from the richardmcmanusjr/FillErUp repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.6 × 49.4 mm with 40 parts on 65 nets, routed with 584 tracks and 70 vias.
It is built around the ESP32-S3-WROOM-1-N4, CP2102N-A02-GQFN24R and 2N7002K-T1-GE3, with the AP2112K-3.3TRG1, KMR231GLFS and USB4105-GF-A among its other parts. Its parts include 11 resistors, 9 capacitors, 6 connectors, 4 ICs and 2 switches. It belongs with the ESP32 boards of this library.
Main components
6ESP32-S3-WROOM-1-N4
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCP2102N-A02-GQFN24R
QFN-24-EP(4x4)-40℃~+85℃@(Ta) 1.3uA 3V~3.6V 9.5mA USB 2.0 USB to UART QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB Converters2N7002K-T1-GE3
SOT-23-55℃~+150℃ 1 N-channel 2.5V 2.5pF 2Ω@10V 300mA 350mW 600pC@10V 60V SOT-23 MOSFETs ROHSVishay IntertechnologyMOSFETsAP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsKMR231GLFS
SMD,4.6x2.8mm-40℃~+85℃ 1.9mm 2.8mm 32V 3N 4.6mm 50mA Gull Wing Round Button SPST Surface Mount,Vertical SMD,4.6x2.8mm Tactile Switches ROHSC&KTactile SwitchesUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdFillErUp
Senior Design Project - Class of 2024
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | EESDLib_Updated:C0603 | R4, R5, R9, R12, R14, R16 |
| 4 | 1u | EESDLib_Updated:C0603 | C2, C4, C10, C13 |
| 4 | MountingHole | EESDLib_Updated:mounting_hole | H1, H2, H3, H4 |
| 2 | 1uf | EESDLib_Updated:C0603 | C5, C6 |
| 2 | 5.1k | EESDLib_Updated:C0603 | R6, R7 |
| 2 | Conn_01x04 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J2, J4 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask3mm | FID1, FID2 |
| 2 | KMR231GLFS | EESDLib_Updated:PB4X2 | S1, S2 |
| 1 | 0.1uf | EESDLib_Updated:C0603 | C3 |
| 1 | 1k | EESDLib_Updated:C0603 | R3 |
| 1 | 22k | EESDLib_Updated:C0603 | R1 |
| 1 | 22uf | EESDLib_Updated:C0805 | C12 |
| 1 | 2N7002KT1G | LIM SWITCH MOSFET:SOT-23_ONS | U4 |
| 1 | 4.7uf | EESDLib_Updated:C0603 | C1 |
| 1 | 47k | EESDLib_Updated:C0603 | R2 |
| 1 | AP2112K-3.3TRG1 | EESDLib_Updated:SOT25 | U1 |
| 1 | CP2102N-A02-GQFN24R | EESDLib_Updated:QFN-24 | U2 |
| 1 | Conn_01x08 | Connector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal | J3 |
| 1 | Conn_01x10_Pin | Connector_JST:JST_XH_S10B-XH-A-1_1x10_P2.50mm_Horizontal | J5 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J6 |
| 1 | ESP32-S3-WROOM-1-N4 | EESDLib_Updated:ESP32-S3-Wroom-1 | U3 |
| 1 | NPNx2 | EESDLib_Updated:SC70-6 | Q1 |
| 1 | USB4105-GF-A | EESDLib_Updated:GCT4105 | J1 |
| 1 | val | EESDLib_Updated:LED_0603 | LED1 |
Similar boards
- 2 layers64.3 × 24.5 mm

- 2 layers63.5 × 99.1 mm

- 2 layers100 × 81.3 mm

- 2 layers100 × 85.8 mm

- 4 layers110 × 80 mm

Esp32p4 extreme
Andreuxxx1977/esp32-p4
An open-hardware, actively cooled ESP32-P4 board for heavy multimedia work: a 2-lane MIPI camera, a 2-lane MIPI display, USB 2.0 High-Speed, 10/100 Ethernet, UHS-I microSD, 32 MB flash and 32 MB PSRAM.
234 parts1CERN-OHL-P-2.0 - 4 layers40 × 80 mm

BarbelMotionTracker V1
ThorbenH/ba-thesis-project
This git project is dedicated to a prototype implementation that attempts to track and evaluate the motion of a barbell in the gym.
123 parts - 2 layers48.6 × 17.2 mm

- 2 layers100 × 100 mm

Splitflap
besi/split-flap-clock
Split Flap clock or calendar utilising four 28BYJ-48 stepper motors.
91 parts1
Questions
How big is the BoardRev1 PCB?
It measures 69.6 × 49.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BoardRev1 use?
40 parts, built around the ESP32-S3-WROOM-1-N4, CP2102N-A02-GQFN24R, 2N7002K-T1-GE3 and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BoardRev1 KiCad files?
From the richardmcmanusjr/FillErUp repository on GitHub, at the commit this page was made from: the board is FINAL MAIN BOARD 2/BoardRev1.kicad_pcb and its schematic BoardRev1/BoardRev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BoardRev1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).