

Nyx1
Enhanced open source Raspberry Pi Pico / Raspberry Pi Pico 2 clone
- Size
- 51 × 21 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 61
- Pads
- 214
- Tracks, vias
- 453, 38
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Jun 2025
- Updated
- 14 Nov 2025
Overview
Nyx1 is an open-source printed circuit board by rh1tech, from the rh1tech/nyx repository on GitHub, published under the MIT licence. It is a 2-layer board of 51 × 21 mm with 39 parts on 61 nets, routed with 453 tracks and 38 vias.
It is built around the RP2040, W25Q128JVSIQ and USB4215-03-A. Its parts include 17 capacitors, 9 resistors, 5 connectors, 3 ICs and 2 switches. It belongs with the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHUSB4215-03-A
SMD-25℃~+85℃ 1 48V 5A Black Female Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | FRANK:Capacitor (0402) | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C15 |
| 4 | 1K | FRANK:Resistor (0402) | R7, R9, R10, R12 |
| 2 | 10u | FRANK:Capacitor (0603) | C17, C18 |
| 2 | 15p | FRANK:Capacitor (0402) | C16, C19 |
| 2 | 1u | FRANK:Capacitor (0603) | C13, C14 |
| 2 | 27R | FRANK:Resistor (0402) | R6, R8 |
| 2 | 5.1K | FRANK:Resistor (0402) | R11, R13 |
| 1 | 12 MHz | FRANK:Crystal (3225) | Y1 |
| 1 | 1M | FRANK:Resistor (0402) | R14 |
| 1 | Blue | FRANK:LED (0402) | LD1 |
| 1 | Boot | FRANK:Button (SMD, 3x3mm, 1-1) | S2 |
| 1 | Green | FRANK:LED (0402) | LD2 |
| 1 | NCP1117 3.3 | FRANK:SOT-223 | U4 |
| 1 | RP2040 | FRANK:QFN 56 | U3 |
| 1 | Reset | FRANK:Button (SMD, 3x3mm, 1-1) | S1 |
| 1 | USB4215-03-A | FRANK:USB Type C | J5 |
| 1 | W25Q128JVSIQ | FRANK:SOIC-8 | U2 |
| 1 | ~ | FRANK:CON_PICO_21-40 | J1 |
| 1 | ~ | FRANK:Test Points (1mm x 2) | J4 |
| 1 | ~ | FRANK:Test Points (1mm x 5) | J3 |
| 1 | ~ | FRANK:CON_PICO_1-20 | J2 |
More from rh1tech/nyx
2- 4 layers51 × 21 mm

- 4 layers51 × 21 mm

Similar boards
- 4 layers99.5 × 65 mm

- 4 layers99.5 × 99.5 mm

- 2 layers53 × 29 mm

- 4 layers32 × 74 mm

- 6 layers112 × 98 mm

- 4 layers33.5 × 24 mm

USBPowerMeter
JunKimmmy/USBPowerMeter
A compact USB-C passthrough power meter that displays real-time voltage, current, and power on an integrated 128×64 OLED screen.
84 parts8 - 4 layers115 × 55 mm

Roamr motors
uw-roamr/roamr
turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip
110 parts6 - 4 layers66 × 46 mm

Radar1
HearnChristian/k-band-fmcw-radar
24 GHz FMCW radar front-end in KiCad (WIP): ADF4159 chirp synth, BGT24LTR11 transceiver, custom Marki AMM-8211PSM driver-amp symbol/footprint, OPA1656 IF, ADS8353 ADC, FT2232H USB.
99 parts3
Questions
How big is the Nyx1 PCB?
It measures 51 × 21 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nyx1 use?
39 parts, built around the RP2040, W25Q128JVSIQ and USB4215-03-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nyx1 KiCad files?
From the rh1tech/nyx repository on GitHub, at the commit this page was made from: the board is hardware/nyx1/nyx1.kicad_pcb and its schematic hardware/nyx1/nyx1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nyx1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).