
AutoTiller
JoeyStrandnes/AutoTiller
Open source DIY device for steering boats with tillers

Cublic is an open-source printed circuit board by rgraetz, from the rgraetz/cubli-redux repository on GitHub. It is a 4-layer board of 50 × 73.2 mm with 39 parts on 34 nets, routed with 184 tracks and 12 vias.
It is built around the SP1103C-01UTG, 2SD1620-TD-E and WST-1210T. Its parts include 15 resistors, 7 ICs, 6 diodes, 3 capacitors and 1 transistor. It belongs with the ESP32 boards of this library.
something here
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R5, R6, R7, R12, R13, R14, R16 |
| 6 | D_Schottky | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R15, R19 |
| 3 | Nidec_24H | Library:PinHeader_1x08_P2.54mm_StrainRelief | U1, U2, U3 |
| 2 | 0.33uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 2 | MPU6050 | Library:Pinheader_1x05_P2.54mm_StrainRelief | U6, U7 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 2SD1620-TD-E | Library:TO-243AA | Q1 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | AITRIP_ESP32 | Library:AITRIP_ESP32 | U5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U4 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | WST-1210T | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | XT30 | Library:XT30PW_M | J1 |

JoeyStrandnes/AutoTiller
Open source DIY device for steering boats with tillers


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop


OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.

axiometa/BrodBoost-PD
Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip
It measures 50 × 73.2 mm and has 4 copper layers, 4.69 mm thick.
39 parts, built around the SP1103C-01UTG, 2SD1620-TD-E and WST-1210T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rgraetz/cubli-redux repository on GitHub, at the commit this page was made from: the board is EE_Design/Cublic.kicad_pcb and its schematic EE_Design/Cublic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rgraetz before reusing the design.