4 layers49.5 × 29 mm
4 layers49.5 × 29 mm
XESC2
rfvermut/xESC2040- Size
- 49.5 × 29 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 96
- Pads
- 414
- Tracks, vias
- 862, 251
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Jul 2022
- Updated
- 30 Sep 2022
Overview
XESC2 is an open-source printed circuit board by rfvermut, from the rfvermut/xESC2040 repository on GitHub. It is a 4-layer board of 49.5 × 29 mm with 90 parts on 96 nets, routed with 862 tracks and 251 vias.
It is built around the RP2040, SN65HVD232D and DRV8300DRGER-MS, with the W25Q128JVPIQ, XC6220B331MR and BSC026N08NS5 among its other parts. Its parts include 29 capacitors, 24 resistors, 10 connectors, 7 ICs and 6 transistors. It belongs with the RP2040 boards of this library.
Main components
7
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
SN65HVD232D
SOIC-8-40℃~+85℃ 17mA 1Mbps 3.3V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
DRV8300DRGER-MS
VQFN-24(4x4)VQFN-24(4x4) Gate Drivers ROHSMSKSEMIGate Drivers
W25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASH
XC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSC026N08NS5
TDSON-8-EP(5x6)TDSON-8-EP(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETs
U254-051T-4BH83-F1S
SMD-40℃~+85℃ 1 1.8A 10000 times 30V 5.08mm 5P Female Micro-B Surface Mount, Right Angle SMD USB Connectors ROHSXKB ConnectionUSB Connectors
README
README.mdxESC2040
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | .1uF | Capacitor_SMD:C_0603_1608Metric | C1, C8, C9, C10, C11, C12, C13, C14, C15, C16, C20 |
| 8 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3, FID4, FID5, FID6, FID7, FID8 |
| 6 | 2R2 | Resistor_SMD:R_0603_1608Metric | R15, R16, R19, R20, R21, R22 |
| 6 | BSC026N08NS5 | Package_TO_SOT_SMD:TDSON-8-1 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R9, R14, R24 |
| 4 | 27pF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C28, C29 |
| 3 | 2.2uF/50V | Capacitor_SMD:C_1206_3216Metric | C18, C26, C27 |
| 3 | 2k2 | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 3 | 470nF/16V | Capacitor_SMD:C_0603_1608Metric | C21, C22, C23 |
| 3 | Conn_02x02_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J6, J9, J10 |
| 3 | DNP | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4 |
| 2 | 150R | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C17 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 4.7uF/16V | Capacitor_SMD:C_0603_1608Metric | C24, C25 |
| 2 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7, J8 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 3mR | Resistor_SMD:R_2512_6332Metric | R18 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x09_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | DRV8300DRGER | DRV8300:VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U3 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D1 |
| 1 | INA180A4 | INA180:SOT95P280X145-5N | U4 |
| 1 | LED GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | MCP2515-xST | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U7 |
| 1 | RP2040 | xESC2:RP2040 | U1 |
| 1 | SN65HVD232 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | U254-051T-4BH83-F1S | USB:XKB_U254-051T-4BH83-F1S | J2 |
| 1 | W25Q128JVP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U2 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U5 |
Questions
How big is the XESC2 PCB?
It measures 49.5 × 29 mm and has 4 copper layers, 1.6 mm thick.
What parts does the XESC2 use?
90 parts, built around the RP2040, SN65HVD232D, DRV8300DRGER-MS and W25Q128JVPIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XESC2 KiCad files?
From the rfvermut/xESC2040 repository on GitHub, at the commit this page was made from: the board is PCB/xESC2.kicad_pcb and its schematic PCB/CAN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the XESC2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rfvermut before reusing the design.
Similar boards
- 2 layers26.5 × 42 mm
- 4 layers22.9 × 58.5 mm
ESP32 DevBoard Minimal Electgpl
electgpl/ESP32S3_DEV_Minimal_LowPower
This project implements a minimal low-power development board based on the ESP32-S3. The design focuses on reducing component count, board complexity, and idle power consumption, while still exposing the full…
38 parts1 - 2 layers50 × 70 mm
Node Alarm Electgpl
electgpl/NodeAlarm
This project is a simple motion sensor with subgigahertz FSK interface based on RFM69 and ESP32C3 RISC-V core, all devices are woken from deep sleep by the IRQ of AS312 PIR sensor, this project is open source and…
50 parts - 2 layers46.6 × 36.2 mm
Cold start power supply
whitfijs-jw/Volvo240-DigitalDash
Volvo 240 Digital Dash Project. It's not much, but its honest work.
29 parts72MIT - 6 layers56.1 × 88 mm
Bldc&foc motor controller
bejaouihamza/bldc-foc-pcb
This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.
108 parts16 - 4 layers70 × 45 mm
Emanresu G431
EmanresuEmanreztuneb/SimpleFOC_G431_Motordriver
A motordriver based in STM's G431 Drone ESC.
112 parts3 - 2 layers97 × 70 mm
DC CDI
romioRN/DC-CDI
ВНИМАНИЕ! в плате есть отсутствующие дjрожки если вы хотите это изготовить вам нужно внести исправления
90 parts1