

MYOCELL8
EMG platform
- Size
- 53.5 × 74.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 103
- Pads
- 418
- Tracks, vias
- 713, 155
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jun 2018
- Updated
- 21 Oct 2026
Overview
MYOCELL8 is an open-source printed circuit board by RF-Lab, from the RF-Lab/emg_platform repository on GitHub. It is a 4-layer board of 53.5 × 74.7 mm with 102 parts on 103 nets, routed with 713 tracks and 155 vias.
It is built around the CP2104EK, OPA340NA and AP2112K-3.3, with the ESD9B3.3ST5G, MMBT2222A and WS2812B among its other parts. Its parts include 41 capacitors, 32 resistors, 8 ICs, 8 diodes and 6 connectors. It belongs with the ESP32 boards of this library.
Main components
8CP2104EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion ModulesOPA340NA
SOT-23-5SOT-23-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedESD9B3.3ST5G
SOD-923(0402)ESD And Surge Protection (TVS/ESD)TECH PUBLICMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedDMG3404L-7
SOT-23-55℃~+150℃ 1 N-channel 1.33W 13.2nC@10V 2V 30V 35mΩ@4.5V 5.8A 51pF 641pF SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMBR0520
SOD-123-55℃~+150℃ 20V 450mV@500mA 5.5A 500mA Independent SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
README
hw_platform/MYOPROBE/readme.mdSingle channel myoelectric analogue pre-conditioning board
Single channel analog pre-amplifier board with built-in EMG electrodes for multiboard MYOCELL design. Includes INA331. Rev 1.0 available. Rev 2.0 for MYOCELL8 in progress.
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R10, R16, R17, R18, R21, R22, R23, R24, R27, R28, R29 +2 |
| 14 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C18, C20, C21, C23, C24, C26, C28, C29, C30, C32, C33, C41 |
| 10 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C15, C17, C19, C22, C27, C34, C38, C40 |
| 10 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C14, C25 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R14, R30 |
| 4 | Conn_01x08 | Connector_FFC-FPC:Hirose_FH12-8S-0.5SH_1x08-1MP_P0.50mm_Horizontal | J1, J2, J3, J4 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R20, R25 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31, C35, C37 |
| 3 | ESD9B3.3ST5G | Diode_SMD:D_SOD-923 | D3, D4, D5 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36, C39 |
| 2 | 300 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R32 |
| 2 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6, U8 |
| 2 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | OPA340NA | Package_TO_SOT_SMD:SOT-23-5 | U1, U3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW1, SW2 |
| 2 | TBD | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R31 |
| 2 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 390k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | ADS1298xPAG | Package_QFP:TQFP-64_10x10mm_P0.5mm | U2 |
| 1 | Battery Connector JC2 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J5 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U5 |
| 1 | DMG3404L | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | ESP32-WROOM-E | RF_Module:ESP32-WROOM-32E | U4 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D8 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | LOGO | Logo:mirea-logo | G*** |
| 1 | MBR0520 | Diode_SMD:D_SOD-123 | D7 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | SW_Nidec_CAS-120A1 | Button_Switch_SMD:Nidec_Copal_CAS-120A | SW3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J6 |
More from RF-Lab/emg_platform
3Similar boards
- 4 layers127 × 96.5 mm

Kicad pulse supply rev B
adilet2109/current-sensor
Bare-metal code base for current sensor board
181 parts1 - 2 layers50.8 × 25.4 mm

ESP32
vul-os/sirboard
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
49 parts56Apache-2.0 - 2 layers90 × 50 mm

- 2 layers70 × 70 mm

- 2 layers100 × 100 mm

- 2 layers67.9 × 131 mm

FW16 EPD
arthomnix/FW16_EPD
Touchscreen e-paper input module for Framework Laptop 16
67 parts44CC-BY-SA-4.0 - 2 layers65 × 30 mm

Epaper
TDA-2030/E-ink-screen
An assistant to help you view text and picture calendars
56 parts33Apache-2.0 - 2 layers101.6 × 76.2 mm

Questions
How big is the MYOCELL8 PCB?
It measures 53.5 × 74.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MYOCELL8 use?
102 parts, built around the CP2104EK, OPA340NA, AP2112K-3.3 and ESD9B3.3ST5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MYOCELL8 KiCad files?
From the RF-Lab/emg_platform repository on GitHub, at the commit this page was made from: the board is hw_platform/MYOCELL8/MYOCELL8.kicad_pcb and its schematic hw_platform/ADS1292EMG2x/ADS1292EMG2x.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MYOCELL8 design in my own project?
Its repository states no licence, so its author keeps all rights: ask RF-Lab before reusing the design.

