Skip to the content
8 layersAutoMate, the printed circuit board in 3D

AutoMate smart-room controller product repository for firmware, hardware, and release evidence.

Copper layers
8
Thickness
1.6 mm
Parts
71
Nets
134
Pads
420
Tracks, vias
247, 12
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 Sep 2026
Updated
17 Sep 2026

Overview

AutoMate is an open-source printed circuit board by reubenvanka, from the reubenvanka/automate repository on GitHub. It is an 8-layer board with 71 parts on 134 nets, routed with 247 tracks and 12 vias.

It is built around the ESP32-DEVKITC-VE, PCA9685PW and 74HC595. Its parts include 11 connectors, 9 diodes, 3 ICs, 1 resistor and 1 switch. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

Auto Mate

Auto Mate is the working product repository for a smart-room controller. The current confirmed intent is coordinated control of lighting and fans, including brightness and color-temperature control, environmental sensing, Home Assistant integration, and a local/custom web interface.

Current status

This repository contains the product foundation only. No GPIO assignments, controller model, electrical schematic, PCB, enclosure, or production safety decisions have been approved yet.

Repository boundaries

  • SPECIFICATIONS.md — source of truth.
  • firmware/esphome/ — future ESPHome product configuration and modules.
  • hardware/kicad/ — future KiCad projects and review artifacts.
  • tests/ — firmware, integration, UX, and hardware-review evidence.
  • docs/ — architecture, AI context, gates, traceability, and release evidence.
  • releases/ — approved release notes and artifacts.
  • backups/ — local working backups; not public release artifacts.

Safety and review boundary

AI may prepare candidate firmware, schematics, netlists, PCB outlines, placement, and validation reports. A human must approve final GPIO mappings, electrical connections, component choices, load switching, placement, routing, safety behavior, and release.

Security

Never commit Wi-Fi credentials, Home Assistant tokens, API keys, customer data, or private commercial information. Keep secrets outside Git and use documented configuration templates.

Parts

71
QtyValueFootprintReferences
26~00.snapeda:D4184 Module Custom UpdatedM1, M2, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M21, M22, M23, M24 +10
91N5817Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_CathodeUpD1, D2, D3, D4, D5, D6, D7, D8, D9
8ST01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_HorizontalT8, T9, T10, T11, T12, T13, T14, T15
7Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_HorizontalT1, T2, T3, T4, T5, T6, T7
2Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ11_Doorsensor1, J12_ZMCT103C1
2Conn_01x03_SocketConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalAC1_ACinput1, AC22_IR_RX1
2Conn_01x05_SocketConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_HorizontalJ2_BH1750, J2_IR_AHT_BH18
110kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR1
174HC595Package_DIP:DIP-16_W7.62mm_SocketU2_74HC595
181500.snapeda:MODULE_815_pca9685U1
18P8CConnector_RJ:RJ45_Amphenol_54602-x08_HorizontalJ1
1Conn_01x03_SocketConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_HorizontalAC22_IR_RX2
1Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ9_AHT_BMP1
1Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ9_ZMPT1
1Conn_01x05_SocketConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ2_IR_AHT_BH17
1ESP32-DEVKITCsnapeda:MODULE_ESP32-DEVKITCU1_ESP32-DEVKITC1
1GNDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical5V1
1PCA9685Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_HorizontalJ2_PCA9685_Female1
1PCA9685Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ2_PCA9685_Male1
1PolyfuseFuse:Fuse_Bourns_MF-RHT700F1
1RelayConnector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ5_Relay1
1SW_DIP_x12Button_Switch_THT:SW_DIP_SPSTx12_Slide_9.78x32.66mm_W7.62mm_P2.54mmSW1_Manual_Override1

More from reubenvanka/automate

1
  • 8 layersAutoMate, the printed circuit board in 3D

    AutoMate

    reubenvanka/automate

    AutoMate smart-room controller product repository for firmware, hardware, and release evidence.

    42 parts

Similar boards

  • 2 layers160.5 × 146.5 mmSchemav2, the printed circuit board in 3D

    Schemav2

    rayanyahiaoui13/24PowerLEDsController

    The goal of this system is to provide independent and precise control of a 24-LED matrix composed of high-power LEDs to independently illuminate 24 wells of a Greiner plate containing duckweed.

    146 parts1GPL-3.0
  • 2 layers99.9 × 99.9 mmSpider Robot, the printed circuit board in 3D

    Spider Robot

    duvohuu/Spider_Robot

    Mechatronics System Design

    62 parts
  • 2 layers104.1 × 127 mmESP32-MultiFunction, the printed circuit board in 3D

    ESP32-MultiFunction

    RobertPHeller/ESP32-LCC

    ESP32 based LCC Boards

    122 parts12
  • 2 layers202.9 × 102.5 mmBulma, the printed circuit board in 3D

    Bulma

    hughminhphan/PROJECTS

    My projects

    77 parts
  • 2 layers265.5 × 132.3 mmDashdash, the printed circuit board in 3D

    Dashdash

    Churrosoft/Dashdash

    tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre

    272 parts1MIT
  • 2 layers100 × 88.9 mmGen2, the printed circuit board in 3D

    Gen2

    Alignof/Juggernaut

    疑似時限爆弾解除競技

    41 parts10MIT
  • 2 layers99.9 × 99.9 mmCastle PCB, the printed circuit board in 3D

    Castle PCB

    IvarNilsson/Castle_Automation

    106 parts2MIT

Questions

What parts does the AutoMate use?

71 parts, built around the ESP32-DEVKITC-VE, PCA9685PW and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AutoMate KiCad files?

From the reubenvanka/automate repository on GitHub, at the commit this page was made from: the board is hardware/kicad/AutoMate_Custom_PCB/AutoMate.kicad_pcb and its schematic hardware/kicad/AutoMate_Custom_PCB/AutoMate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AutoMate design in my own project?

Its repository states no licence, so its author keeps all rights: ask reubenvanka before reusing the design.