
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

Reproduction of a homemade cartridge i got a while simply named the "Astercart rev5" I found another person with a similar cart on Twitter ( @retroWizzard ) who gave me the romdump from his cartridge.
RetroFletch AsterCart V5 is an open-source printed circuit board by Retrofletch, from the Retrofletch/AsterCartV5Repro repository on GitHub. It is a 2-layer board of 58 × 84 mm with 12 parts on 46 nets, routed with 441 tracks and 27 vias.
It is built around the 74LS02PC and 74LS273PC.
Reproduction of a homemade cartridge i got a while simply named the "Astercart rev5" I found another person with a similar cart on Twitter ( @retroWizzard ) who gave me the romdump from his cartridge.
Because i liked this cartridge and figured others probably would aswell i decided to make a resproduction of it.
Changes i made was removd 2 IC pads that was not used and i added a jumper header to choose between using my 27C801 multicart ROM and @RetroWizzards 27C1001 Giana Sisters rom. I also added a LED and a Reset button.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | @HOLE0, @HOLE1 | ||
| 1 | FCIII+e5frog134_double_holes_HCT04:B3F-31XX | RESET | |
| 1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | ||
| 1 | FCIII+e5frog134_double_holes_HCT04:LED3E | + | |
| 1 | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | 100nf | |
| 1 | 27C020 | FCIII+e5frog134_double_holes_HCT04:DIL32 | U$1 |
| 1 | 560 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | |
| 1 | 74LS02 | FCIII+e5frog134_double_holes_HCT04:DIL14 | 74LS02 |
| 1 | 74LS273 | FCIII+e5frog134_double_holes_HCT04:DIL20 | 74LS273 |
| 1 | C64_EXPANSION | FCIII+e5frog134_double_holes_HCT04:EDGE44_254 | U$2 |
| 1 | LOGO | Symbol:aster_small | G*** |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

btb/80ColumnCard
An Apple II 80-Column Card. Based on the Videx Videoterm


clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II


It measures 58 × 84 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the 74LS02PC and 74LS273PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Retrofletch/AsterCartV5Repro repository on GitHub, at the commit this page was made from: the board is KiCad/RetroFletch_AsterCart_V5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Retrofletch before reusing the design.