
O32controller
qwertpas/O32controller
Miniature closed-loop controller for brushless DC motors

PCB for DRV8871
DRV8871 PCB is an open-source printed circuit board by retrobuiltRyan, from the retrobuiltRyan/DRV8871_motor_driver repository on GitHub. It is a 2-layer board of 30 × 20.1 mm with 12 parts on 8 nets, routed with 20 tracks and 25 vias.
It is built around the DRV8871DDA and SMF15A. Its parts include 3 diodes, 2 capacitors, 2 resistors, 2 connectors and 1 IC.
PCB for DRV8871: a basic DC motor driver for small to maybe medium brushed motors. https://www.ti.com/lit/ds/symlink/drv8871.pdf
##BoM
| Reference | Value | Qty | Digi-Key P/N |
|---|---|---|---|
| C1 | 47µF 35V | 1 | PCE5014CT-ND |
| C2 | 0.1µF 35V | 1 | 399-C1206C104M6RACTUCT-ND |
| D2 | LED | 1 | 732-4989-1-ND |
| D3, D4 | SMF15A | 2 | SMF15A-E3-08CT-ND |
| R1 | 32k | 1 | 2019-RN73H2BTTD3202F100CT-ND |
| R3 | 1k | 1 | 311-1.00KFRCT-ND |
| U1 | DRV8871DDA | 1 | 296-43024-1-ND |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SMF15A | Diode_SMD:D_SMF | D3, D4 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | 0.1uF 50V | Capacitor_SMD:CP_Elec_5x5.3 | C1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 32k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 47uF 50V | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | DRV8871DDA | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | PINHD_1x4_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | PINHD_1x6_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |

qwertpas/O32controller
Miniature closed-loop controller for brushless DC motors


retrobuiltRyan/4x4_Rover_ESP32
1:10 scale robot Rover with ESP32 and PS4 controller. Custom PCB for multi channel motor control

retrobuiltRyan/esp32c3_xiao_iot_pcb
PCB for MQTT projects. Sensor, i2c, Screen, and buck converter breakout

s13n/AES42HAT
A digital audio interface in the shape of a Raspberry Pi Hat for AES42 microphones and more.

xlazam01/AstroUniBoard
STM32G0B1-based telescope focuser/rotator controller — OnStepX firmware port + KiCad PCB

bornier-dev/bornier
Open source EtherCAT slaves for machine tools running LinuxCNC: hardware, firmware and tooling.

It measures 30 × 20.1 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the DRV8871DDA and SMF15A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the retrobuiltRyan/DRV8871_motor_driver repository on GitHub, at the commit this page was made from: the board is DRV8871_PCB.kicad_pcb and its schematic DRV8871_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask retrobuiltRyan before reusing the design.