2 layers58 × 48 mm
2 layers62.5 × 49 mm
SLSS
Retaron/SLSSCode for hobby project of mushroom manager
- Size
- 62.5 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 29
- Pads
- 46
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Sep 2025
- Updated
- 4 Nov 2026
Overview
SLSS is an open-source printed circuit board by Retaron, from the Retaron/SLSS repository on GitHub. It is a 2-layer board of 62.5 × 49 mm with 8 parts on 29 nets.
It is built around the ARDUINO UNO R3 and L298N. Its parts include 1 resistor, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdSLSS
Code for hobby project of mushroom manager
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | Arduino_UNO_R3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-9_1x09_P5.00mm_Horizontal | A1 |
| 1 | Barrel_Jack | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | L298N | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal | U1 |
| 1 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | PeltierElement | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | PE1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | WC1602A | Display:WC1602A | DS1 |
Questions
How big is the SLSS PCB?
It measures 62.5 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SLSS use?
8 parts, built around the ARDUINO UNO R3 and L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SLSS KiCad files?
From the Retaron/SLSS repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB V3/SLSS LightRail/SLSS LightRail.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SLSS design in my own project?
Its repository states no licence, so its author keeps all rights: ask Retaron before reusing the design.
More from Retaron/SLSS
3- 2 layers33.5 × 47.6 mm
- 2 layers
Similar boards
- 2 layers127 × 86.4 mm
- 2 layers76.1 × 85 mm
- 4 layers85 × 54 mm
PECDR
pedro-ibs/trekking
Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”
68 parts9 - 2 layers66.3 × 34.3 mm
C64PSUv3
FabioNMI/C64PSU
A low-cost, lightweight and very reliable power supply for the Commodore 64
37 parts2 - 2 layers
RoboForce
Khuzhin06/RoboForce
Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.
3 parts2 - 2 layers
- 2 layers127 × 117.5 mm
Diy ert
CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.
44 parts1MIT - 2 layers99.5 × 99.5 mm
SchematicKiCadProyect
dduarteCE/Robot-vacuum
Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.
42 parts1MIT