Skip to the content
2 layers127 × 86.4 mmSmart Animal Feeder FINAL, the printed circuit board in 3D

411 Collab site

Size
127 × 86.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
50
Pads
98
Tracks, vias
85, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
10 Oct 2023
Updated
8 Dec 2023

Overview

Smart Animal Feeder FINAL is an open-source printed circuit board by jaygermeister, from the jaygermeister/ECE411-SmartAnimalFeeder repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 127 × 86.4 mm with 12 parts on 50 nets, routed with 85 tracks and 0 vias.

It is built around the ARDUINO UNO R3 and L298N. Its parts include 6 resistors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

ECE411 Smart Animal Feeder

The Smart Animal Feeder is a comprehensive solution that caters to the diverse needs of pets in a household. It brings convenience, efficiency, and peace of mind to pet owners, ensuring that feeding time becomes a harmonious and stress-free experience.

The product will be designed as a team effort for ECE411 of Fall 2023 at Portland State University.

Team 13 is under the instruction of Andrew Greenberg.

Team Members:

  • Isaac Miller
  • Brian Bach
  • James Best
  • Tommy Lee

Parts

12
QtyValueFootprintReferences
6R_USResistor_SMD:R_0402_1005MetricR1, R2, R3, R4, R5, R6
1Arduino_UNO_R3Module:Arduino_UNO_R3_WithMountingHolesA1
1Barrel_JackConnector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_HorizontalJ1
1L298NRFID:L298NU1
1R_Small_USResistor_SMD:R_0402_1005MetricRLPS1
1R_USResistor_SMD:R_0603_1608MetricRVIN1
1~RFID:RFID_WIZRFID_WIZ1

Similar boards

  • 2 layers62.5 × 49 mmSLSS, the printed circuit board in 3D

    SLSS

    Retaron/SLSS

    Code for hobby project of mushroom manager

    8 parts
  • 2 layers76.1 × 85 mmFlypi, the printed circuit board in 3D

    Flypi

    amchagas/Flypi

    This is the repository for the flypi project

    45 parts88GPL-2.0
  • 4 layers85 × 54 mmPECDR, the printed circuit board in 3D

    PECDR

    pedro-ibs/trekking

    Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”

    68 parts9
  • 2 layers66.3 × 34.3 mmC64PSUv3, the printed circuit board in 3D

    C64PSUv3

    FabioNMI/C64PSU

    A low-cost, lightweight and very reliable power supply for the Commodore 64

    37 parts2
  • 2 layersRoboForce, the printed circuit board in 3D

    RoboForce

    Khuzhin06/RoboForce

    Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.

    3 parts2
  • 2 layersRP2040 minimal, the printed circuit board in 3D

    RP2040 minimal

    ltherreraro/Wally

    Recolector de basura espacios cerrados usando esp32

    58 parts2
  • 2 layers127 × 117.5 mmDiy ert, the printed circuit board in 3D

    Diy ert

    CainPatel/diy-ert

    A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

    44 parts1MIT
  • 2 layers99.5 × 99.5 mmSchematicKiCadProyect, the printed circuit board in 3D

    SchematicKiCadProyect

    dduarteCE/Robot-vacuum

    Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.

    42 parts1MIT

Questions

How big is the Smart Animal Feeder FINAL PCB?

It measures 127 × 86.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Smart Animal Feeder FINAL use?

12 parts, built around the ARDUINO UNO R3 and L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Smart Animal Feeder FINAL KiCad files?

From the jaygermeister/ECE411-SmartAnimalFeeder repository on GitHub, at the commit this page was made from: the board is Smart Animal Feeder FINAL.kicad_pcb and its schematic Team13_SAF_Final_Ver5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Smart Animal Feeder FINAL design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).