
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

custom 34-key split ergo mechanical keyboard
Nightjar34 is an open-source printed circuit board by rejyr, from the rejyr/nightjar34 repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 132.5 × 101.5 mm with 46 parts on 40 nets, routed with 578 tracks and 83 vias.
Its parts include 17 diodes and 17 switches.
docs WIP

set File > Board Setup... > Design Rules > Constraints > Copper to edge clearance: to 0.25 mm
this removes the The routing start point violates DRC. error when routing the xiao ble underside pins
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | ceoloide:switch_choc_v1_v2 | S1, S2, S3, S4, S5, S6, S7, S8, S10, S11, S12, S13, S14, S15, S16, S17 +1 | |
| 17 | ceoloide:diode_tht_sod123 | D1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12, D13, D14, D15, D16, D17 +1 | |
| 4 | jumper | _1, _2, _3, _4 | |
| 4 | ceoloide:mounting_hole_plated | H1, H2, H3, H4 | |
| 1 | mcu_xiao_ble | MCU1 | |
| 1 | ceoloide:battery_connector_jst_ph_2 | JST1 | |
| 1 | ceoloide:power_switch_smd_side | PWR1 | |
| 1 | ceoloide:reset_switch_smd_side | RST1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
It measures 132.5 × 101.5 mm and has 2 copper layers, 1.6 mm thick.
46 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rejyr/nightjar34 repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).