Skip to the content
2 layers61 × 52 mmTreadmill Illumination, the printed circuit board in 3D

Treadmill Illumination

reiserlab/Fly-Lab-Gear21

This is where the Reiser Lab and colleagues are sharing tools and methods that are useful for lab experiments with _Drosophila_ neurobiology.

Size
61 × 52 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
12
Pads
61
Tracks, vias
101, 0
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
20 Mar 2020
Updated
22 Oct 2026

Overview

Treadmill Illumination is an open-source printed circuit board by reiserlab, from the reiserlab/Fly-Lab-Gear repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 61 × 52 mm with 28 parts on 12 nets, routed with 101 tracks and 0 vias.

Its parts include 16 diodes, 4 resistors and 1 connector.

Parts

28
QtyValueFootprintReferences
8LEDLED_THT:LED_D3.0mmD9, D10, D11, D12, D13, D14, D15, D16
8LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D2, D3, D4, D5, D6, D7, D8
3MountingHole_PadMountingHole:MountingHole_2.2mm_M2_PadH1, H2, H3
2120Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_HorizontalR3, R4
21kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2
2R_PotentiometerPotentiometer_THT:Potentiometer_Bourns_3386C_HorizontalRV1, RV2
2R_PotentiometerPotentiometer_THT:Potentiometer_Bourns_3005_HorizontalRV3, RV4
1Barrel_Jack_MountingPinConnector_BarrelJack:DC-IN-TH_DC-053D-20AJ1

More from reiserlab/Fly-Lab-Gear

4
  • 2 layers56 × 34 mmTreadmill Illumination v2-0603, the printed circuit board in 3D

    Treadmill Illumination v2-0603

    reiserlab/Fly-Lab-Gear

    This is where the Reiser Lab and colleagues are sharing tools and methods that are useful for lab experiments with _Drosophila_ neurobiology.

    11 parts21CERN-OHL-W-2.0
  • 2 layers56 × 34 mmTreadmill Illumination v2-1206, the printed circuit board in 3D

    Treadmill Illumination v2-1206

    reiserlab/Fly-Lab-Gear

    This is where the Reiser Lab and colleagues are sharing tools and methods that are useful for lab experiments with _Drosophila_ neurobiology.

    11 parts21CERN-OHL-W-2.0
  • 2 layers61 × 34 mmTreadmill Illumination v2-tht, the printed circuit board in 3D

    Treadmill Illumination v2-tht

    reiserlab/Fly-Lab-Gear

    This is where the Reiser Lab and colleagues are sharing tools and methods that are useful for lab experiments with _Drosophila_ neurobiology.

    11 parts21CERN-OHL-W-2.0
  • 2 layers34 × 33.3 mmM55-RJ45, the printed circuit board in 3D

    M55-RJ45

    reiserlab/Fly-Lab-Gear

    This is where the Reiser Lab and colleagues are sharing tools and methods that are useful for lab experiments with _Drosophila_ neurobiology.

    6 parts21CERN-OHL-W-2.0

Similar boards

  • 2 layers44.5 × 72.7 mmOSO SWAT C1-jig, the printed circuit board in 3D

    OSO SWAT C1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    28 parts2.1k
  • 2 layers95 × 54 mmEinkPDA screen, the printed circuit board in 3D

    EinkPDA screen

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    28 parts2kApache-2.0
  • 2 layers45 × 45 mmSmartbuttons, the printed circuit board in 3D

    Smartbuttons

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    28 parts915
  • 2 layers24.1 × 36.2 mmEsp32miniBT, the printed circuit board in 3D

    Esp32miniBT

    asterics/esp32_mouse_keyboard

    ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

    28 parts911GPL-3.0
  • 2 layers34.8 × 12.2 mmInfnoise goldfingers, the printed circuit board in 3D

    Infnoise goldfingers

    waywardgeek/infnoise

    The world's easiest TRNG to get right

    28 parts854CC0-1.0
  • 2 layers55.9 × 99.1 mmStm32f0 disco Luos shield, the printed circuit board in 3D

    Stm32f0 disco Luos shield

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    28 parts546MIT
  • 2 layers88 × 25 mmEleLab v2 Frontpanel a, the printed circuit board in 3D

    EleLab v2 Frontpanel a

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    28 parts531GPL-3.0

Questions

How big is the Treadmill Illumination PCB?

It measures 61 × 52 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Treadmill Illumination use?

28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Treadmill Illumination KiCad files?

From the reiserlab/Fly-Lab-Gear repository on GitHub, at the commit this page was made from: the board is Walking-Setup/Treadmill-Illumination/Treadmill-Illumination-v1/Treadmill-Illumination.kicad_pcb and its schematic Walking-Setup/Treadmill-Illumination/Treadmill-Illumination-v1/Treadmill-Illumination.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Treadmill Illumination design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).