2 layers235.1 × 177.8 mm
2 layers235.1 × 177.8 mm
Atari-1090XL R10
reifsnyderb/Atari-1090XL-R102Modern and Upgraded Re-make of the Atari 1090XL Expansion System Main Board
- Size
- 235.1 × 177.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 116
- Pads
- 617
- Tracks, vias
- 3,166, 167
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Feb 2024
- Updated
- 7 Feb 2024
Overview
Atari-1090XL R10 is an open-source printed circuit board by reifsnyderb, from the reifsnyderb/Atari-1090XL-R10 repository on GitHub. It is a 2-layer board of 235.1 × 177.8 mm with 97 parts on 116 nets, routed with 3,166 tracks and 167 vias.
It is built around the LM78M05CH and LM79M12CH. Its parts include 28 capacitors, 15 resistors, 10 ICs, 8 connectors and 4 inductors. It belongs with the retro computing and games boards and the FPGA and CPLD boards of this library.
Main components
2LM78M05CH
TO-3-40℃~+125℃ 1 35V 3mA 40uV 500mA 5V 78dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM79M12CH
TO-220-30℃~+125℃@(Tj) 1 1.1V@(0.5A) 1.5mA 12V 19V 400uV 500mA 70dB@(120Hz) Fixed Negative Over Current Protection、Short Circuit Protection、Thermal shutdown TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | D | 1090:D_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | CR5, CR6, CR7, CR10, CR11, CR12, CR13, CR14, CR17, CR18, CR19, CR20, CR21, CR22, CR23, CR24 +2 |
| 11 | .01uF | 1090:C_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28 |
| 8 | 100 | 1090:R_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | R4, R5, R6, R7, R8, R9, R10, R11 |
| 4 | 680 | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C2, C8, C9, C11 |
| 4 | D | 1090:D_5KP_P10.16mm_Horizontal | CR1, CR2, CR3, CR4 |
| 4 | FB | 1090:L_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | L1, L2, L3, L4 |
| 3 | 3300 | 1090:CP_Radial_D22.0mm_P7.50_10.00mm_SnapIn | C3, C4, C7 |
| 3 | 470 | 1090:R_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | R1, R12, R14 |
| 3 | 47uF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C13, C15, C17 |
| 3 | 74LS244 | Package_DIP:DIP-20_W7.62mm_Socket | U4, U5, U7 |
| 2 | .22uF 50v | Capacitor_THT:C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal | C12, C14 |
| 2 | 1500 | 1090:CP_Radial_D13.0mm_P7.50mm | C5, C6 |
| 2 | 1K | 1090:R_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | R2, R3 |
| 2 | 74LS541 | Package_DIP:DIP-20_W7.62mm_Socket | U4A1, U5A1 |
| 2 | GND | Connector_Pin:Pin_D1.0mm_L10.0mm | TP5, TP6 |
| 2 | LED_ALT | 1090:LED_D5.0mm_FlatTop | CR15, CR16 |
| 1 | !RDY | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | +10V | Connector_Pin:Pin_D1.0mm_L10.0mm | TP2 |
| 1 | +12V | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1 |
| 1 | -12V | Connector_Pin:Pin_D1.0mm_L10.0mm | TP4 |
| 1 | .001uF | 1090:C_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | C1 |
| 1 | .22uF 50v | 1090:C_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | C16 |
| 1 | 1500 | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C10 |
| 1 | 220 | 1090:R_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | R13 |
| 1 | 4.7k | 1090:R_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | R15 |
| 1 | 74LS645 | Package_DIP:DIP-20_W7.62mm_Socket | U6 |
| 1 | ATF16V8B_Complex | Package_DIP:DIP-20_W7.62mm_Socket | U7A1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | External Switch and LED Connector | Connector_Molex:Molex_KK-396_A-41791-0004_1x04_P3.96mm_Vertical | J7 |
| 1 | J2 | Atari:AtariSocket_2x25_P2.54mm_Vertical | J2 |
| 1 | J3 | Atari:AtariSocket_2x25_P2.54mm_Vertical | J3 |
| 1 | J4 | Atari:AtariSocket_2x25_P2.54mm_Vertical | J4 |
| 1 | J5 | Atari:AtariSocket_2x25_P2.54mm_Vertical | J5 |
| 1 | J6 | Atari:AtariSocket_2x25_P2.54mm_Vertical | J6 |
| 1 | LM78M05 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM78M12 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LM79M12 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | PARALLEL_BUS_INTERFACE | 1090:Edge-50 | P1 |
| 1 | SW_SPST | footprints:E101J1ABE2 | S1 |
| 1 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | TP3 |
Similar boards
- 4 layers68 × 50 mm
PicoChainZero
jasonalexander-ja/PicoChain
Power and I2C daisy chained over ethernet patch cables.
41 parts1MIT - 2 layers100 × 60 mm
Car complex
EnzoBorrelli/Formula-ESP-archives.---The_lightning...Spanish_version
to do= a description
36 parts - 4 layers203 × 64 mm
IbScaleSeqRails
ibScale/ibScaleSeqRails
Sequential feeder rails with power protection for the LumenPNP
305 partsCERN-OHL-S-2.0 - 2 layers60.6 × 110 mm
- 2 layers381 × 50.8 mm
StereoTheremin
mikechristle/StereoTheremin
I'm sure you are familiar with the Theremin. It is a musical instrument that uses hand movements to control pitch and volume. With my version each hand controls both pitch and volume.
92 partsMIT - 2 layers205.4 × 99.9 mm
Imp
nmatic00/max1491-4wire-ohmmeter
My first KiCAD project. 4 Wire Kelvin Ohmmeter based on MAX1491 ADC.
91 partsMIT - 2 layers110 × 68.5 mm
Questions
How big is the Atari-1090XL R10 PCB?
It measures 235.1 × 177.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atari-1090XL R10 use?
97 parts, built around the LM78M05CH and LM79M12CH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atari-1090XL R10 KiCad files?
From the reifsnyderb/Atari-1090XL-R10 repository on GitHub, at the commit this page was made from: the board is 1090.kicad_pcb and its schematic 1090.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atari-1090XL R10 design in my own project?
Its repository states no licence, so its author keeps all rights: ask reifsnyderb before reusing the design.