2 layers60 × 40 mm
Receptor IR
EnzoBorrelli/Formula-ESP-archives.---The_lightning...Spanish_version
to do= a description
10 parts
2 layers100 × 60 mm
to do= a description
- Size
- 100 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 57
- Pads
- 133
- Tracks, vias
- 207, 5
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Sep 2022
- Updated
- 26 Oct 2022
Overview
Car complex is an open-source printed circuit board by EnzoBorrelli, from the EnzoBorrelli/Formula-ESP-archives.---The_lightning...Spanish_version repository on GitHub. It is a 2-layer board of 100 × 60 mm with 36 parts on 57 nets, routed with 207 tracks and 5 vias.
It is built around the LM78M05CH and ULN2003A. Its parts include 9 diodes, 8 connectors, 5 capacitors, 4 ICs and 3 resistors. It belongs with the ESP32 boards of this library.
Main components
2LM78M05CH
TO-3-40℃~+125℃ 1 35V 3mA 40uV 500mA 5V 78dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive TO-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
README
README.mdFormula-ESP-archives.---The-lightning
que hacer= descripcion
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1n4001 | EESTN5:DO-41 | D2, D3, D4, D5, D6, D7, D8, D9 |
| 4 | VAL** | EESTN5:hole_2mm | hole_2mm, hole_2mm, hole_2mm, hole_2mm |
| 2 | 220uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C5 |
| 2 | 470 | EESTN5:RES0.3 | R2, R3 |
| 2 | led rgb | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J6, J7 |
| 1 | 100n | Capacitor_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C4 |
| 1 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1k | EESTN5:RES0.3 | R1 |
| 1 | ESP32_DevKit_V1_DOIT | EESTN5:ESP32_DEVKIT_V1_DOIT | U3 |
| 1 | L298(H)N | Package_TO_SOT_THT:TO-220-15_P2.54x2.54mm_StaggerEven_Lead4.58mm_Vertical | U4 |
| 1 | LED | EESTN5:led_3mm_clear | D1 |
| 1 | LM78M05 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LOGO | ender_logo:78 | G*** |
| 1 | LOGO | ender_logo:p | G*** |
| 1 | SW_SPDT | EESTN5:SW_SPDT_TH_Vertical | switch1 |
| 1 | ULN2003A | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | bateria | EESTN5:BORNERA2_AZUL | J5 |
| 1 | buzzer | EESTN5:Pin_strip_2 | J1 |
| 1 | conector a stepper | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | motor der | EESTN5:BORNERA2_AZUL | J4 |
| 1 | motor izq | EESTN5:BORNERA2_AZUL | J3 |
| 1 | salida emisor | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J8 |
More from EnzoBorrelli/Formula-ESP-archives.---The_lightning...Spanish_version
2- 2 layers20 × 20 mm
Emisor IR
EnzoBorrelli/Formula-ESP-archives.---The_lightning...Spanish_version
to do= a description
8 parts
Similar boards
- 2 layers235.1 × 177.8 mm
- 2 layers235.1 × 177.8 mm
Atari-1090XL R10
reifsnyderb/Atari-1090XL-R10
Modern and Upgraded Re-make of the Atari 1090XL Expansion System Main Board
97 parts2 - 4 layers68 × 50 mm
PicoChainZero
jasonalexander-ja/PicoChain
Power and I2C daisy chained over ethernet patch cables.
41 parts1MIT - 4 layers203 × 64 mm
IbScaleSeqRails
ibScale/ibScaleSeqRails
Sequential feeder rails with power protection for the LumenPNP
305 partsCERN-OHL-S-2.0 - 2 layers60.6 × 110 mm
- 2 layers381 × 50.8 mm
StereoTheremin
mikechristle/StereoTheremin
I'm sure you are familiar with the Theremin. It is a musical instrument that uses hand movements to control pitch and volume. With my version each hand controls both pitch and volume.
92 partsMIT - 2 layers205.4 × 99.9 mm
Imp
nmatic00/max1491-4wire-ohmmeter
My first KiCAD project. 4 Wire Kelvin Ohmmeter based on MAX1491 ADC.
91 partsMIT - 2 layers110 × 68.5 mm
Questions
How big is the Car complex PCB?
It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Car complex use?
36 parts, built around the LM78M05CH and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Car complex KiCad files?
From the EnzoBorrelli/Formula-ESP-archives.---The_lightning...Spanish_version repository on GitHub, at the commit this page was made from: the board is kicad PCBs/car-complex/car-complex.kicad_pcb and its schematic kicad PCBs/car-complex/car-complex.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Car complex design in my own project?
Its repository states no licence, so its author keeps all rights: ask EnzoBorrelli before reusing the design.