Skip to the content
11 layers106.1 × 55.1 mmIDEFlex, the printed circuit board in 3D

Fully portable original (2001) Xbox handheld using real hardware

Size
106.1 × 55.1 mm
Copper layers
11
Thickness
0.22 mm
Parts
20
Nets
40
Pads
198
Tracks, vias
268, 50
Pours
4
Routed
Yes
KiCad
KiCad 8.99 (file 20240706)
Created
10 Jun 2024
Updated
27 May 2025

Overview

IDEFlex is an open-source printed circuit board by Redherring32, from the Redherring32/Xbox-Portable repository on GitHub. It is an 11-layer board of 106.1 × 55.1 mm with 20 parts on 40 nets, routed with 268 tracks and 50 vias.

Its parts include 7 connectors, 5 resistors and 1 IC.

README

README.md

Xbox-Portable

Fully portable original (2001) Xbox handheld using real hardware

License:

Licensed under the TAPR Open Hardware License (www.tapr.org/OHL)

©Redherring32 2023-2024

Parts

20
QtyValueFootprintReferences
7Conn_01x04_PinIDEFlex:EdgePadJ1, J2, J3, J4, J5, J6, J7
5TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4, TP5
210KResistor_SMD:R_0402_1005MetricR1, R2
11KResistor_SMD:R_0402_1005MetricR4
1330RResistor_SMD:R_0402_1005MetricR3
15.6KResistor_SMD:R_0402_1005MetricR5
1IDE25IDEFlex:IDEU1

The 18 most common of 20 parts.

More from Redherring32/Xbox-Portable

6
  • 13 layers121.2 × 34.2 mmXbox PMS, the printed circuit board in 3D

    Xbox PMS

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    150 parts93
  • 4 layers138.6 × 70.7 mmS Controller, the printed circuit board in 3D

    S Controller

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    72 parts93
  • 2 layers26.9 × 10.3 mmUSB Termination, the printed circuit board in 3D

    USB Termination

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    31 parts93
  • 4 layers87.4 × 19.4 mmXboxUSB C, the printed circuit board in 3D

    XboxUSB C

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    24 parts93
  • 2 layers18.5 × 229 mmHDMI Flex, the printed circuit board in 3D

    HDMI Flex

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    4 parts93
  • 2 layers49.2 × 67.2 mmLPC Flex, the printed circuit board in 3D

    LPC Flex

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    4 parts93

Similar boards

  • 11 layers28.3 × 12.3 mmRFController, the printed circuit board in 3D

    RFController

    dodotronix/RemBrake

    electronic system to control breaks on handbikes remotely

    19 parts
  • 11 layers44 × 73 mmGb video pico breakout, the printed circuit board in 3D

    Gb video pico breakout

    chromalock/CGBLinkVideo

    Playing media on a gameboy color over the link cable, with the help of an RPi Pico

    15 parts39
  • 11 layers64 × 41.4 mmESPCB, the printed circuit board in 3D

    ESPCB

    shvmm/espcb-bms-comms

    An ESP32 series based PCB for implementing BMS comms to Solar Inverters

    13 partsLGPL-2.1
  • 11 layers68.8 × 53.6 mmTesla seat controller shield, the printed circuit board in 3D

    Tesla seat controller shield

    ForestKatsch/unofficial-tesla-seat-controller

    STM32G0-based controller for four seat motors, two ventilation fans, and the seat switchpack. Input is a regulated 12 V Mean Well power supply; record the exact model before system testing.

    12 parts

Questions

How big is the IDEFlex PCB?

It measures 106.1 × 55.1 mm and has 11 copper layers, 0.22 mm thick.

What parts does the IDEFlex use?

20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IDEFlex KiCad files?

From the Redherring32/Xbox-Portable repository on GitHub, at the commit this page was made from: the board is FlexPCBs/IDE-Flex/IDEFlex.kicad_pcb and its schematic Controller-PCBs/S Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IDEFlex design in my own project?

Its repository states no licence, so its author keeps all rights: ask Redherring32 before reusing the design.