2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers61 × 42.5 mm
Esp summer sensor
red-stripe/esp_summer_sensorA little board to monitor temperature and power consumption as I slowly melt
- Size
- 61 × 42.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 29
- Pads
- 74
- Tracks, vias
- 181, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Jan 2018
- Updated
- 11 Apr 2018
Overview
Esp summer sensor is an open-source printed circuit board by red-stripe, from the red-stripe/esp_summer_sensor repository on GitHub. It is a 2-layer board of 61 × 42.5 mm with 20 parts on 29 nets, routed with 181 tracks and 2 vias.
It is built around the ESP-12E. Its parts include 6 resistors, 5 connectors, 2 capacitors, 2 ICs and 1 switch. It belongs with the home automation and IoT and sensors and measurement boards and the ESP8266 boards of this library.
Main components
1Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistors_SMD:R_1206_HandSoldering | R1, R2, R4, R5 |
| 2 | Conn_01x04 | Connectors_Sparkfun:1X04 | J4, J5 |
| 1 | 0 | Resistors_SMD:R_1206 | R6 |
| 1 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 1uF | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | Conn_01x06 | Connectors_Sparkfun:1X06-SMD_RA_MALE | J6 |
| 1 | ESP-12E | ESP8266:ESP-12E | U3 |
| 1 | JACK2.1MM | fab:fab-JACK_2.1MM | J1 |
| 1 | MIC39100-3.3_SOT223 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | R | Resistors_SMD:R_1206_HandSoldering | R3 |
| 1 | Reset Switch | fab:fab-6MM_SWITCH | S1 |
| 1 | SPDTSWITCH | fab:fab-AYZ0102AGRLC | M1 |
| 1 | TERM-1X02-FABLAB | fab:fab-ED555DS-2DS | J3 |
The 17 most common of 20 parts.
Questions
How big is the Esp summer sensor PCB?
It measures 61 × 42.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp summer sensor use?
20 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp summer sensor KiCad files?
From the red-stripe/esp_summer_sensor repository on GitHub, at the commit this page was made from: the board is kicad/ESP_summer_sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp summer sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask red-stripe before reusing the design.
Similar boards
- 2 layers43 × 34.3 mm
- 2 layers25.6 × 23 mm
Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 2 layers104.8 × 72.1 mm
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers30 × 65 mm
Hardpass pcb
girst/hardpass-passwordmanager-mirror-of-git.gir.st
https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.
34 parts101GPL-3.0 - 2 layers82.5 × 22.4 mm
Window Sensor
MakerMeik/Window-Sensor
Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w
19 parts67 - 2 layers49.5 × 30 mm
- 2 layers100 × 45 mm
