

Testbench sub8
Arquitetura de processador conceitual
- Size
- 91.4 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 51
- Pads
- 178
- Tracks, vias
- 604, 66
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Dec 2025
- Updated
- 24 Aug 2026
Overview
Testbench sub8 is an open-source printed circuit board by rcapaverde, from the rcapaverde/cubo repository on GitHub. It is a 2-layer board of 91.4 × 63.5 mm with 25 parts on 51 nets, routed with 604 tracks and 66 vias.
It is built around the 74LS125DC, 74LS240DC and 74LS574N. Its parts include 9 resistors, 7 capacitors, 7 ICs, 1 diode and 1 connector.
Main components
374LS125DC
-0℃~+70℃ 1 10ns@5.5V,50pF 15mA 18mA 24mA 4 4.5V~5.5V 74LS Power-off isolation、Output enable Tri-State Unidirectional - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS240DC
--55℃~+125℃ 1 15mA 18ns@5V,45pF 24mA 29mA 4.75V~5.25V 74LS Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS574N
-0ns 0℃~+70℃ 1 2.6mA 20ns 24mA 28ns@5V,45pF 35MHz 4.75V~5.25V 74LS Series 8 D-Type Rising Edge Tri-State - Flip Flops ROHSRochester Electronics, LLCFlip Flops
README
README.mdcubo - um processador conceitual
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 7 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7 |
| 4 | 74LS125 | Package_DIP:DIP-14_W7.62mm | U4, U5, U6, U7 |
| 2 | 74LS574 | Package_DIP:DIP-20_W7.62mm | U1, U2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | 74LS240 | Package_DIP:DIP-20_W7.62mm | U3 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | conn | edge_connector:edge-conector-14 | J3 |
More from rcapaverde/cubo
12- 2 layers120.6 × 47 mm

- 2 layers137.8 × 73.6 mm

- 2 layers160.7 × 210 mm

- 2 layers297 × 125 mm

- 2 layers160.7 × 210 mm

- 2 layers

- 2 layers126.3 × 210 mm

- 2 layers

- 2 layers274.3 × 124.5 mm

- 2 layers297 × 75 mm

- 2 layers77.5 × 125 mm

- 2 layers209.5 × 125.1 mm

Similar boards
- 2 layers100 × 100 mm

- 2 layers160.5 × 100.2 mm

8080 Board
sladek/SBC_8080_ECB
This is my attempt to build a single-board microcomputer based on the Intel 8080 CPU. It contains the following features:
112 parts - 4 layers253.6 × 137.7 mm

S100 Thunder186-1.0-006
RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.
118 parts1 - 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers155.1 × 156 mm

- 4 layers100 × 100 mm

- 2 layers99.1 × 99.1 mm

RC1802 CPU
tebl/RC1802-Cosmac-ELF
With the RC6502-project for making an Apple 1 replica done I wanted to do something different, so I started designing a simple version of the RCA 1802-based Cosmac ELF instead.
54 parts31GPL-3.0 - 2 layers220 × 173.3 mm

SF-7017
fabiodl/sf7000
Most of the work was done by Andrea Ottaviani https://github.com/aotta
68 parts10GPL-3.0
Questions
How big is the Testbench sub8 PCB?
It measures 91.4 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Testbench sub8 use?
25 parts, built around the 74LS125DC, 74LS240DC and 74LS574N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Testbench sub8 KiCad files?
From the rcapaverde/cubo repository on GitHub, at the commit this page was made from: the board is pcb_v2/testbench-sub8/testbench-sub8.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Testbench sub8 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rcapaverde before reusing the design.