
M1s fpga playground
tomek-szczesny/m1s-fpga-playground
An add-on board with FPGA for ODROID M1S.

Auto-targeting point-defence turret
Turret is an open-source printed circuit board by rblaze, from the rblaze/mbed-turret repository on GitHub. It is a 2-layer board of 56 × 32 mm with 51 parts on 59 nets, routed with 340 tracks and 33 vias.
It is built around the TPA2005D1DGN, W25Q16JLSSIG and BC848. Its parts include 19 capacitors, 9 resistors, 5 ICs, 2 diodes and 1 transistor. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C7, C8, C11, C15, C16 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric | C6, C9, C10 |
| 3 | MountingHole | Custom_IC:JLCPCB_Tooling_Hole | H1, H2, H3 |
| 2 | 10K | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | ANGLE1, VOL1 |
| 2 | 150K | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C1, C14 |
| 2 | 50K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C17 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 200 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 20p | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 2u2 | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 5 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 50 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | BC848 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Battery | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | QWIIC1 |
| 1 | Conn_01x06 | Connector_Molex:Molex_SPOX_5267-06A_1x06_P2.50mm_Vertical | PROG1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323 | D2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Laserdiode_1C2A | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | LD1 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H4 |
| 1 | SRV_LAS | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | M1 |
| 1 | SRV_SEN | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | M2 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | Speaker | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | SPK1 |
| 1 | TLV70028_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | TPA2005D1DGN | Custom_IC:TI_VSSOP-PowerPAD-8_3.0x3.0mm_P0.65mm_ThermalVias | U3 |
| 1 | TPS61322xADBV | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | W25Q16JLSSIG | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |

tomek-szczesny/m1s-fpga-playground
An add-on board with FPGA for ODROID M1S.


benjiaomodular/MiniOSC
A schmitt-trigger inverter based sawtooth and pulse oscillator module

mpfisher69/R2R-Bluetooth-Remote
An open source repository of Bluetooth Remote Controller for Reel-to-Reel tape recorders and vintage cassette decks.

jbtronics/FTController
A Motor controller for Fischertechnik with many cool features.



moyamartin/bms_hardware
This is the hardware design section of the BMS project. It was designed with KiCAD.
It measures 56 × 32 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the TPA2005D1DGN, W25Q16JLSSIG and BC848. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rblaze/mbed-turret repository on GitHub, at the commit this page was made from: the board is board/turret.kicad_pcb and its schematic board/turret.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rblaze before reusing the design.