

Frequency Meter
Created a Frequency Meter which can calculate an unknown frequency of 0.00 to 99.99 successfully using a 100Hz Time Base Frequency
- Size
- 88 × 94.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 71
- Pads
- 250
- Tracks, vias
- 651, 112
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Nov 2024
- Updated
- 6 Aug 2025
Overview
Frequency Meter is an open-source printed circuit board by rakshit9695, from the rakshit9695/Frequency-Meter repository on GitHub. It is a 2-layer board of 88 × 94.5 mm with 28 parts on 71 nets, routed with 651 tracks and 112 vias.
It is built around the LTS-6980HR. Its parts include 18 ICs, 5 resistors and 3 diodes.
Main components
1README
README.mdFrequency-Meter
Overview
The Frequency Meter is a digital circuit designed to measure an unknown input frequency in the range of 0.00 Hz to 99.99 Hz. It operates using a 100 Hz Time Base Frequency as a reference for measurement accuracy.
This project includes both the schematic and PCB design created using KiCad. The design is compact and intended for educational or experimental use in lab environments or as a standalone frequency counter module.
Features
- Measures frequency in the range 0.00 Hz to 99.99 Hz
- 100 Hz Time Base for accurate measurement
- Dual-digit decimal output display
- Optimized for simplicity and low component count
- Designed in KiCad (open-source EDA)
How It Works
The working principle is based on frequency counting using a time gate. The unknown signal is counted over a fixed time window of 1 second (derived from a 100 Hz time base using a divider circuit). The counted pulses are then scaled and displayed on a 2-digit 7-segment display, showing values in the format XX.XX.
Major Blocks:
- Time Base Generator: Generates 100 Hz from a crystal oscillator or other stable reference.
- Frequency Counter Logic: Counts the number of pulses from the unknown frequency source during the gate time.
- Display Driver: Converts the counted value into a human-readable format using 7-segment displays.
Schematic and PCB
- Schematic File:
0682.kicad_sch - PCB Layout File:
0682.kicad_pcb
These files can be opened using KiCad (version 6 or later recommended).
Components Used (Typical)
- Crystal Oscillator or Timer IC (for 100 Hz base)
- Flip-flops / Logic ICs (74-series or CD4000)
- Counters (e.g., CD4017, 74LS90)
- 7-Segment Display Drivers
- 7-Segment Displays (2-digit)
- Resistors, Capacitors, and other passive components
- Optional: Microcontroller (if using software counter)
Applications
- Frequency counter for waveform generators
- Educational kits and demonstrations
- DIY electronics lab equipment
- Signal analysis and debugging tools
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 74AUC1G74 | SN74AUC1G74DCURE4:SOP50P310X90-8N | U2, U4, U8, U10, U14, U15, U17, U18, U19 |
| 5 | R | Resistor_SMD:R_0201_0603Metric | R1, R2, R3, R4, R5 |
| 4 | 7490 | SN74LS90N:DIP254P762X508-14 | U1, U3, U7, U12 |
| 3 | IR26-21C_L110_TR8 | LED_SMD:LED_1206_3216Metric | D1, D2, D3 |
| 2 | 7447 | IC 7447:DIP794W45P254L1969H508Q16 | U9, U11 |
| 2 | LTS-6980HR | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2 |
| 1 | 7404 | SN7404N:DIP794W45P254L1969H508Q14 | U20 |
| 1 | 7408 | SN74LS08N:DIP794W45P254L1969H508Q14 | U16 |
| 1 | 74151 | SN74151AN:DIP762W46P254L1930H508Q16 | U13 |
Similar boards
- 2 layers

- 2 layers74.9 × 110.5 mm

- 2 layers

UZ80
adzierzanowski/z80
Zilog Z80 (and Intel 8080) assembler/disassembler for everyone and some other tools for my private Z80 stuff
112 parts2 - 2 layers100 × 100 mm

DimmerDigital Pic16f628a
Agustin586/Pic-Projects
Aca se encuentran todos los programas de pic
57 parts1 - 2 layers265.5 × 132.3 mm

Dashdash
Churrosoft/Dashdash
tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre
272 parts1MIT - 2 layers100 × 100 mm

- 2 layers

Reloj digital
maxielibossio-beep/Reloj-digital
Pcb, esquematico y simulacion del reloj digital
77 parts1 - 2 layers113.4 × 85.7 mm

Questions
How big is the Frequency Meter PCB?
It measures 88 × 94.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Frequency Meter use?
28 parts, built around the LTS-6980HR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Frequency Meter KiCad files?
From the rakshit9695/Frequency-Meter repository on GitHub, at the commit this page was made from: the board is 0682.kicad_pcb and its schematic 0682.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Frequency Meter design in my own project?
Its repository states no licence, so its author keeps all rights: ask rakshit9695 before reusing the design.