Skip to the content
PCBKitNew board
2 layers180 × 131.1 mmCCController, the printed circuit board in 3D

PCB and Firmware of our first universal RGB light installation controller.

Size
180 × 131.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
92
Nets
83
Pads
306
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
14 Feb 2023
Updated
5 Aug 2024

Overview

CCController is an open-source printed circuit board by RainbowLabsDE, from the RainbowLabsDE/LightInstallationController repository on GitHub, published under the MIT licence. It is a 2-layer board of 180 × 131.1 mm with 92 parts on 83 nets.

It is built around the CH32V003F4U6, MAX485ED and BP1808, with the RY8310 and AO3401A among its other parts. Its parts include 32 capacitors, 15 resistors, 15 diodes, 8 ICs and 6 inductors. It belongs with the interfaces and adapters boards and the RISC-V boards of this library.

Main components

5

README

README.md

LightInstallationController

Parts

92
QtyValueFootprintReferences
101uCapacitor_SMD:C_0603_1608MetricC2, C4, C6, C8, C10, C12, C14, C16, C18, C20
10MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6, H7, H8, H9, H10
7100nCapacitor_SMD:C_0402_1005MetricC23, C24, C26, C27, C28, C30, C32
6LED_RGBLED_SMD:LED_RGB_Getian_GT-P6PRGB4303D11, D11, D12, D12, D13, D13
50R68Resistor_SMD:R_1206_3216MetricR1, R2, R3, R4, R5
510uInductor_SMD:L_Chilisin_BMRA00050520L1, L2, L3, L4, L5
51nCapacitor_SMD:C_0603_1608MetricC1, C5, C9, C13, C17
540V 1A SchottkyDiode_SMD:D_SOD-123D1, D2, D3, D4, D5
54u7Capacitor_SMD:C_0603_1608MetricC3, C7, C11, C15, C19
5BP1808Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mmU1, U2, U3, U4, U5
31kResistor_SMD:R_0402_1005MetricR9, R10, R12
3LEDLED_SMD:LED_0402_1005MetricD7, D9, D10
2100kResistor_SMD:R_0402_1005MetricR6, R11
222uCapacitor_SMD:CP_Elec_5x5.4C29, C31
2CCapacitor_SMD:C_0402_1005MetricC21, C22
10,2AFuse:Fuse_0402_1005MetricF2
110kResistor_SMD:R_0402_1005MetricR14
115VDiode_SMD:D_0402_1005MetricD6
11MResistor_SMD:R_0402_1005MetricR7
11kCapacitor_SMD:C_0402_1005MetricR15
1270kResistor_SMD:R_0402_1005MetricR8
14.7uInductor_SMD:L_Abracon_ASPI-0630LRL6
147uCapacitor_SMD:CP_Elec_5x5.4C25
152.50 kResistor_SMD:R_0402_1005MetricR13
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1CH32V003F4U6Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalViasIC1
1Conn_01x02_PinTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ11
1Conn_01x03_SocketConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ13
1MAX485EPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU6
1RY8310Package_TO_SOT_SMD:SOT-23-6IC2
1TagConnectConnector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ12
1Thermistor_NTCResistor_SMD:R_0402_1005MetricTH1

Questions

How big is the CCController PCB?

It measures 180 × 131.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CCController use?

92 parts, built around the CH32V003F4U6, MAX485ED, BP1808 and RY8310. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CCController KiCad files?

From the RainbowLabsDE/LightInstallationController repository on GitHub, at the commit this page was made from: the board is Hardware/CCController/CCController.kicad_pcb and its schematic Hardware/CCController/CCController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CCController design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

More from RainbowLabsDE/LightInstallationController

3
  • 2 layers40 × 60 mmStripController, the printed circuit board in 3D

    StripController

    RainbowLabsDE/LightInstallationController

    PCB and Firmware of our first universal RGB light installation controller.

    73 parts4MIT
  • 2 layers48 × 10 mmWSxx5VController - Kopie, the printed circuit board in 3D

    WSxx5VController - Kopie

    RainbowLabsDE/LightInstallationController

    PCB and Firmware of our first universal RGB light installation controller.

    27 parts4MIT
  • 2 layers20.5 × 10 mmWSxx5VController, the printed circuit board in 3D

    WSxx5VController

    RainbowLabsDE/LightInstallationController

    PCB and Firmware of our first universal RGB light installation controller.

    25 parts4MIT

Similar boards

  • 4 layers50 × 62 mmPowermeter1P1I, the printed circuit board in 3D

    Powermeter1P1I

    RainbowLabsDE/PowerMeasure_1Ph

    this repo is still undergoing major changes and should not yet be rebuilt

    79 parts1MIT
  • 2 layers40 × 50 mmWS2811 3W, the printed circuit board in 3D

    WS2811 3W

    Techbeard/RS485_WS2811_10W

    RS485 WS2811 10W RGB LED Treiber

    53 parts1
  • 2 layers90 × 50 mmSensactHsLed3, the printed circuit board in 3D

    SensactHsLed3

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    96 parts4Apache-2.0
  • 4 layers45 × 60 mmWCH ETH LOW, the printed circuit board in 3D

    WCH ETH LOW

    RainbowLabsDE/WCH-ETH-LowBudget

    176 parts
  • 4 layers84.8 × 49.7 mmDoor lock, the printed circuit board in 3D

    Door lock

    abiduldul/Door_lock

    66 parts
  • 2 layers149.9 × 134.2 mmSwadge HW, the printed circuit board in 3D

    Swadge HW

    emilyanthony4244/Super-2027-Swadge-HW

    Super 2027 Swadge

    134 parts2MIT
  • 4 layers45 × 38 mmMerlynCAM, the printed circuit board in 3D

    MerlynCAM

    YeetTheAnson/MerlynCAM

    An action camera that records at 1080p@90, 1440p@60 and 4k@20 (With I2S microphone and gyro logging @ 150Hz)

    150 parts1
  • 4 layers46 × 80 mmRFly One, the printed circuit board in 3D

    RFly One

    YeetTheAnson/RFly-One

    Offline general aviation proximity awareness system with support for ADS-B, FLARM AIR V7, OGNTP and FANET+

    188 parts