2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers87 × 38.5 mm
- Size
- 87 × 38.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 4
- Pads
- 14
- Tracks, vias
- 22, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Sep 2026
- Updated
- 11 Sep 2026
Overview
Pro1 is an open-source printed circuit board by rahul91889, from the rahul91889/rectifier-pcb repository on GitHub. It is a 2-layer board of 87 × 38.5 mm with 7 parts on 4 nets, routed with 22 tracks and 0 vias.
Its parts include 4 diodes, 2 connectors and 1 resistor.
README
README.mdRectifier
This is my first pcb project and in which i use 4 diode and 1 resistor then connecting all the device and i done my first project all ERC and DRC done.
Preview
Schematic
pcb editor
pcb
How to Open the Project
- Install KiCad.
- Clone or download this repository.
- Open
pro1.kicad_proin KiCad. - Open the Schematic Editor to view the circuit schematic.
- Open the PCB Editor to view or modify the PCB layout.
APP used
KICAD
Made By
Nidhi Kumawat
video link
https://cdn.hackclub.com/01a0908a-aa88-7c23-a9e7-774adc695588/pcb-video.mp4
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 2 | PinHeader_01x02_P2.54mm_Vertical_THT_D1.4mm | PCM_fab:PinHeader_01x02_P2.54mm_Vertical_THT_D1.4mm | J2, J3 |
| 1 | R_1206 | PCM_fab:R_1206 | R1 |
Questions
How big is the Pro1 PCB?
It measures 87 × 38.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pro1 use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pro1 KiCad files?
From the rahul91889/rectifier-pcb repository on GitHub, at the commit this page was made from: the board is pro1.kicad_pcb and its schematic pro1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pro1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rahul91889 before reusing the design.
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
