2 layers65 × 56 mm
2 layers25.4 × 22.2 mm
Esp prog adapter
rafw87/hardware-modules7Set of DIY hardware modules.
- Size
- 25.4 × 22.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 10
- Pads
- 26
- Tracks, vias
- 56, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Jan 2021
- Updated
- 12 Nov 2022
Overview
Esp prog adapter is an open-source printed circuit board by rafw87, from the rafw87/hardware-modules repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 25.4 × 22.2 mm with 4 parts on 10 nets, routed with 56 tracks and 4 vias.
It belongs with the interfaces and adapters boards and the ESP32 and ESP8266 boards of this library.
README
modules/esp-32-board/README.mdESP-32 board on Arduino footprint
ESP-WROOM-32 (or ESP32-SOLO-1) development kit with Micro-USB port, DC Input and ESP-PROG interface.
Based on Arduino Uno/Leonardo footprint, so (apart from interesting appearance) allows to use stands and (partially) enclosures from original Arduino.
Note: It's not an Arduino clone, so it's not compatible (neither electrically nor physically) with Arduino shields. Functionally it's evaluation board like ESP32-DevKitC.
Resources
- Schematic
- BOM
- Project on PCBWay
- Gerbers
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Pin header 1x05, 2.54mm | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3, J4 |
| 1 | Male IDC connector 2x05, 1.27mm, SMD | Connector_IDC:IDC-Header_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Male IDC connector, 2x03, 1.27mm, SMD | Connector_IDC:IDC-Header_2x03_P1.27mm_Vertical_SMD | J1 |
More from rafw87/hardware-modules
3- 2 layers53.4 × 68.6 mm
- 2 layers20.8 × 18.3 mm
Similar boards
- 2 layers18.5 × 26 mm
24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
4 parts1.7kApache-2.0 - 2 layers116 × 33 mm
- 2 layers19 × 18 mm
Daughter board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
4 parts915 - 2 layers24.8 × 24.8 mm
Nrf24 breakout
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
4 parts803MIT - 2 layers26 × 20 mm
Cap chain
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
4 parts744MIT - 2 layers34.7 × 20 mm
XG Station Power MSI
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
4 parts712CC-BY-4.0 - 2 layers20.3 × 24.5 mm
Jack power input
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
4 parts546MIT - 2 layers35.1 × 92.1 mm
SDEX2M2 MicroSD Express to M.2 NVMe Adapter for Switch 2 WIP
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
4 parts542GPL-3.0
Questions
How big is the Esp prog adapter PCB?
It measures 25.4 × 22.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp prog adapter use?
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp prog adapter KiCad files?
From the rafw87/hardware-modules repository on GitHub, at the commit this page was made from: the board is esp-prog-adapter/esp-prog-adapter.kicad_pcb and its schematic modules/power-monitor-hat/power-monitor-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp prog adapter design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).