2 layers150 × 52 mm
2 layers
ProjectMolesonController
RafaelRiber/ProjectMoleson- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 62
- Pads
- 146
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Jan 2020
- Updated
- 13 Jan 2020
Overview
ProjectMolesonController is an open-source printed circuit board by RafaelRiber, from the RafaelRiber/ProjectMoleson repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 29 parts on 62 nets.
It is built around the MCP73831T-2ACI/OT-HXY, 12401598E4#2A and MBR120. Its parts include 8 resistors, 6 capacitors, 3 ICs, 2 diodes and 1 switch. It belongs with the SAM D and SAM boards of this library.
Main components
3Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R8, R9 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D4.0mm | TP1 |
| 1 | 1000pF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 12401598E4#2A | Type-C:12401598E4#2A | USB1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | ATSAMD21G18A-AUT | ATSAMD21G18A-MU:QFN50P700X700X90-49N | U1 |
| 1 | Battery_Cell | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | CLK | TestPoint:TestPoint_Pad_D4.0mm | TP4 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | DIO | TestPoint:TestPoint_Pad_D4.0mm | TP3 |
| 1 | GND | TestPoint:TestPoint_Pad_D4.0mm | TP2 |
| 1 | KMR231NG LFS | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | MBR120 | Diode_SMD:D_SOD-123F | D1 |
| 1 | MCP1727T-3302E_MF | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm | U2 |
| 1 | MCP73831T-2ACI_OT | digikey-footprints:SOT-753 | U3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | RST | TestPoint:TestPoint_Pad_D4.0mm | TP5 |
| 1 | smd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
Questions
What parts does the ProjectMolesonController use?
29 parts, built around the MCP73831T-2ACI/OT-HXY, 12401598E4#2A and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProjectMolesonController KiCad files?
From the RafaelRiber/ProjectMoleson repository on GitHub, at the commit this page was made from: the board is ProjectMolesonController/ProjectMolesonController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProjectMolesonController design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from RafaelRiber/ProjectMoleson
1Similar boards
- 4 layers299 × 127 mm
- 6 layers100 × 70 mm
Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0 - 2 layers36 × 38 mm
- 4 layers
- 2 layers91.5 × 94.3 mm
Keypad
litruv/5x5Keypad
5x5 mechanical keyboard, demonstrating the capabilities of the cheapest boards possible from a PCB manufacturer
67 parts - 4 layers162 × 87 mm
- 2 layers108 × 95.3 mm
Blue Wizard
wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware
47 parts38 - 2 layers230.1 × 77.6 mm
