

12hp power
Designing and building an Eurorack synthesizer at home.
- Size
- 58.4 × 109.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 892
- Nets
- 8
- Pads
- 909
- Tracks, vias
- 20, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Jan 2022
- Updated
- 1 Sep 2026
Overview
12hp power is an open-source printed circuit board by rafaelmartins, from the rafaelmartins/eurorack repository on GitHub. It is a 2-layer board of 58.4 × 109.2 mm with 892 parts on 8 nets, routed with 20 tracks and 0 vias.
Its parts include 3 capacitors and 1 connector. It belongs with the audio and music boards of this library.
README
README.md[!IMPORTANT] Development has moved to https://git.rafaelmartins.com/rafaelmartins/eurorack. Please check https://git.rafaelmartins.com/ for details on how to contribute.
eurorack
Designing and building an Eurorack synthesizer at home.
General terms
- Everything other than the case and power supply should be designed from scratch, at home.
- PCBs are designed to be easily assembled at home.
- PTH is preferred, but SMD parts are allowed.
- Bare MCUs are preferred, but custom PCB-friendly development boards (like Raspberry Pi Pico) are allowed when the bare MCU is not easy to hand solder.
License
Unless otherwise noted, these are the applicable licenses:
- Source code: BSD 3-Clause "New" or "Revised" License
- Hardware design (including 3d models, schematics, PCBs, etc): CERN Open Hardware Licence Version 2 - Strongly Reciprocal
Parts
892| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CP | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3 |
| 1 | +12v | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2 |
| 1 | +5v | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1 |
| 1 | -12v | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP4 |
| 1 | GND | TestPoint:TestPoint_THTPad_D2.5mm_Drill1.2mm | TP3 |
| 1 | IDC Header 2x8 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
The 8 most common of 892 parts.
More from rafaelmartins/eurorack
12- 2 layers38.1 × 109.2 mm

- 2 layers17.8 × 109.2 mm

- 2 layers38.2 × 110.2 mm

Midi oscillator front
rafaelmartins/eurorack
Designing and building an Eurorack synthesizer at home.
54 parts2 - 2 layers38.2 × 110.1 mm

- 2 layers37.8 × 107.3 mm

As3340-vco front
rafaelmartins/eurorack
Designing and building an Eurorack synthesizer at home.
42 parts2 - 2 layers37.8 × 70.2 mm

As3340-vco back
rafaelmartins/eurorack
Designing and building an Eurorack synthesizer at home.
35 parts2 - 2 layers38.4 × 100.5 mm

- 2 layers18.3 × 94 mm

As3310-adsr back
rafaelmartins/eurorack
Designing and building an Eurorack synthesizer at home.
24 parts2 - 2 layers17.8 × 98.7 mm

Midi splitter front
rafaelmartins/eurorack
Designing and building an Eurorack synthesizer at home.
23 parts2 - 2 layers18.3 × 107.4 mm

As3310-adsr front
rafaelmartins/eurorack
Designing and building an Eurorack synthesizer at home.
22 parts2 - 2 layers17.5 × 107.3 mm

- 2 layers38.2 × 110.2 mm

Midi oscillator back
rafaelmartins/eurorack
Designing and building an Eurorack synthesizer at home.
18 parts2
Similar boards
- 2 layers75 × 49 mm

MCU PROTO 83x58mm
galopago/misistemote
Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board.
893 parts11MIT - 2 layers162 × 107.6 mm

SparkFun BlueSMiRF v2-JST panelized
sparkfun/SparkFun_BlueSMiRF-v2
Documentation, firmware, and hardware Files for the SparkFun BlueSMiRF v2. These boards work as a wireless UART pipe and are a great wireless replacement for serial cables.
890 parts5 - 2 layers

- 2 layers141.9 × 72.9 mm

Imu to dxl 10p
jyg9/microduck-community-kit
补充microduck缺少的硬件电路和固件,另外配套一些测试工具。imu_to_dxl;banana_pcb;microduck复刻
897 parts28Apache-2.0 - 2 layers141.9 × 72.9 mm

- 2 layers86.4 × 141.4 mm

- 2 layers160 × 100.3 mm

Peix
pozsarzs/zacchaeus
8-bit microcomputer built from commercially available and home-built components
884 partsEUPL-1.2 - 2 layers202.2 × 229.8 mm

Switch boxes panelized
atait/DIPcap
Variable capacitor based on DIP switches ranging from 1nF to 1mF
881 parts
Questions
How big is the 12hp power PCB?
It measures 58.4 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 12hp power use?
892 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 12hp power KiCad files?
From the rafaelmartins/eurorack repository on GitHub, at the commit this page was made from: the board is prototype-pcbs/12hp-power/12hp-power.kicad_pcb and its schematic modules/as3310-adsr/pcb/back/as3310-adsr_back.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 12hp power design in my own project?
Its repository states no licence, so its author keeps all rights: ask rafaelmartins before reusing the design.