2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers53.3 × 52.3 mm
Raai session controller hardware
race-against-ai/session_controller_hardware- Size
- 53.3 × 52.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 35
- Pads
- 107
- Tracks, vias
- 12, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Dec 2023
- Updated
- 6 Jan 2025
Overview
Raai session controller hardware is an open-source printed circuit board by race-against-ai, from the race-against-ai/session_controller_hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53.3 × 52.3 mm with 10 parts on 35 nets, routed with 12 tracks and 0 vias.
Its parts include 2 resistors, 2 diodes and 1 connector. It belongs with the RP2040 boards of this library.
README
README.mdraai_session_controller_hardware
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 150 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | RaspberryPi-Pico | twyleg-board-connectors:RaspberryPiPicoW-THT-Dev | A1 |
The 6 most common of 10 parts.
Questions
How big is the Raai session controller hardware PCB?
It measures 53.3 × 52.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Raai session controller hardware use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raai session controller hardware KiCad files?
From the race-against-ai/session_controller_hardware repository on GitHub, at the commit this page was made from: the board is raai_session_controller_hardware.kicad_pcb and its schematic raai_session_controller_hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raai session controller hardware design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0