

Ab pedal
Effects pedals and stomboxes
- Size
- 102.2 × 47.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 35
- Pads
- 119
- Tracks, vias
- 138, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Apr 2022
- Updated
- 3 Nov 2026
Overview
Ab pedal is an open-source printed circuit board by rabidaudio, from the rabidaudio/effects repository on GitHub. It is a 4-layer board of 102.2 × 47.8 mm with 31 parts on 35 nets, routed with 138 tracks and 8 vias.
It is built around the MAX1044ESA+. Its parts include 9 resistors, 7 capacitors, 6 connectors, 4 ICs and 3 switches. It belongs with the audio and music boards of this library.
Main components
1README
README.mdCustom effects pedals
Homemade guitar/bass effects pedals.
License
Schematics, board layouts, documentation, etc. is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

If you're interested in commercial use, please ask first.
Any source code is licensed under MIT.
Notes
jacks: neutrik from shared effects lib
capacitors: Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm
resistors (flush): Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal
alpha 9mm pots: Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical
CASE:
outer dims: 120x65 mm
wall depth: 2 mm
usable inner space: 102x60 mm
screw area: 8.6x8.6 mm
center point: 160.02 x 101.6 mm
pots minimum 12mm from top
stomp switch ~34mm from bottomParts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1, R2, R3, R4 |
| 4 | 100n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C3, C6, C7 |
| 3 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C2, C4, C5 |
| 2 | 1.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R8, R9 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R6, R7 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R5 |
| 1 | BLEND B100K | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | IN | _project:Jack_6.35mm_Neutrik_NMJ6HCD3_Horizontal | J2 |
| 1 | INVERT | _project:MTS-DPDT | SW2 |
| 1 | Jack-DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | LED_ARGB | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM337_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | MAX1044 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | ON | _project:PinHeader_2x03_P2.54mm_Vertical | SW3 |
| 1 | OUT | _project:Jack_6.35mm_Neutrik_NMJ6HCD3_Horizontal | J7 |
| 1 | PEDAL | _project:Jack_6.35mm_Neutrik_NMJ6HCD3_Horizontal | J1 |
| 1 | RECV | _project:Jack_6.35mm_Neutrik_NMJ6HCD3_Horizontal | J6 |
| 1 | SEND | _project:Jack_6.35mm_Neutrik_NMJ6HCD3_Horizontal | J4 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | TRUE_BYPASS | _project:MTS-DPDT | SW1 |
More from rabidaudio/effects
5- 4 layers95.5 × 101.6 mm

- 2 layers58.4 × 91.7 mm

- 2 layers143.5 × 95.3 mm

- 2 layers58.4 × 85.1 mm

- 2 layers52 × 84.6 mm

Similar boards
- 4 layers161 × 100 mm

- 2 layers94.5 × 63.5 mm

- 2 layers95.6 × 99.4 mm

Guitar Fx Dev
GadgetReboot/Guitar_Pedal_Interface
Guitar jacks, stomp switch, pots, toggle switches and a -9v supply generator from +9v in for guitar effect prototyping.
35 parts2 - 2 layers55 × 485 mm

- 4 layers100 × 60 mm

Simple just sensor
williamlin108/USAYPT2026_FlashSensor_MLWGS
10kHz cutoff bandwidth; TO-5 Package Si-photodiode with TIA amplifier (G:2k)
78 parts1 - 2 layers68.6 × 53.3 mm

- 2 layers100.4 × 100 mm

ECE4450 FinalProject
bakerbass/ece4450filter
This project is to create a functioning circuit on a Tangible Waves form-factor module.
64 parts - 2 layers51.5 × 68 mm

Questions
How big is the Ab pedal PCB?
It measures 102.2 × 47.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ab pedal use?
31 parts, built around the MAX1044ESA+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ab pedal KiCad files?
From the rabidaudio/effects repository on GitHub, at the commit this page was made from: the board is ab-pedal/ab-pedal.kicad_pcb and its schematic ab-pedal/ab-pedal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ab pedal design in my own project?
Its repository states no licence, so its author keeps all rights: ask rabidaudio before reusing the design.