

Guitar Fx Dev
Guitar jacks, stomp switch, pots, toggle switches and a -9v supply generator from +9v in for guitar effect prototyping.
- Size
- 95.6 × 99.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 53
- Pads
- 129
- Tracks, vias
- 221, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Jan 2025
- Updated
- 24 Jan 2025
Overview
Guitar Fx Dev is an open-source printed circuit board by GadgetReboot, from the GadgetReboot/Guitar_Pedal_Interface repository on GitHub. It is a 2-layer board of 95.6 × 99.4 mm with 35 parts on 53 nets, routed with 221 tracks and 11 vias.
It is built around the MAX1044ESA+ and PJ-202A. Its parts include 17 connectors, 5 resistors, 4 capacitors, 4 switches and 3 diodes. It belongs with the audio and music boards of this library.
Main components
2README
README.mdGuitar_Pedal_Interface

Guitar jacks, stomp switch, pots, toggle switches and a -9v supply generator from +9v in for guitar effect prototyping.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5, J10, J11, J12, J13, J14, J15 |
| 4 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J4, J7, J9 |
| 4 | PJ-644F | Footprints:Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal | J1, J3, J6, J8 |
| 3 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C3, C4 |
| 3 | Adam Tech SW-T2-2E-A-A2-M1 | Footprints:Toggle_Sw_SPDT | SW2, SW3, SW4 |
| 3 | B100K | Footprints:Potentiometer_Vimex | R2, R3, R4 |
| 2 | 680r | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R5 |
| 2 | LED_Small_ALT | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J16 |
| 1 | LOGO | _Custom_Footprints:pcb way logo | G*** |
| 1 | MAX1044 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | PJ-202A | digikey-footprints:Barrel_Jack_5.5mmODx2.1mmID_PJ-202A | J17 |
| 1 | SW_3PDT | Footprints:STOMP-SWITCH-3PDT | SW1 |
| 1 | TVS | Diode_THT:D_DO-15_P12.70mm_Horizontal | D3 |
Similar boards
- 4 layers161 × 100 mm

- 2 layers94.5 × 63.5 mm

- 2 layers55 × 485 mm

- 4 layers100 × 60 mm

Simple just sensor
williamlin108/USAYPT2026_FlashSensor_MLWGS
10kHz cutoff bandwidth; TO-5 Package Si-photodiode with TIA amplifier (G:2k)
78 parts1 - 2 layers68.6 × 53.3 mm

- 2 layers100.4 × 100 mm

ECE4450 FinalProject
bakerbass/ece4450filter
This project is to create a functioning circuit on a Tangible Waves form-factor module.
64 parts - 2 layers51.5 × 68 mm

- 4 layers95.5 × 101.6 mm

Questions
How big is the Guitar Fx Dev PCB?
It measures 95.6 × 99.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Guitar Fx Dev use?
35 parts, built around the MAX1044ESA+ and PJ-202A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Guitar Fx Dev KiCad files?
From the GadgetReboot/Guitar_Pedal_Interface repository on GitHub, at the commit this page was made from: the board is KiCad/Guitar_Fx_Dev.kicad_pcb and its schematic KiCad/Guitar_Fx_Dev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Guitar Fx Dev design in my own project?
Its repository states no licence, so its author keeps all rights: ask GadgetReboot before reusing the design.