

MagnetorquerFinalBoard
PCBs for satellite
- Size
- 90.2 × 95.9 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 63
- Nets
- 137
- Pads
- 364
- Tracks, vias
- 523, 76
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Mar 2019
- Updated
- 11 Oct 2024
Overview
MagnetorquerFinalBoard is an open-source printed circuit board by queens-satellite-team, from the queens-satellite-team/pcbs repository on GitHub. It is a 4-layer board of 90.2 × 95.9 mm with 63 parts on 137 nets, routed with 523 tracks and 76 vias.
It is built around the IRLR120N, MCP42010-I/P and MIC29302WU, with the SN74LVC1G18DBVR-TP among its other parts. Its parts include 12 capacitors, 7 resistors, 4 diodes, 2 ICs and 1 connector.
Main components
4IRLR120N
DPAK100V, 10A, N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedMCP42010-I/P
PDIP-14-300mil-40℃~+85℃ 10kΩ 1MHz 2 2.7V~5.5V 256 52Ω 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function PDIP-14-300mil Digital Potentiometers ROHSMicrochip TechnologyDigital PotentiometersMIC29302WU
TO-263-5-40℃~+125℃@(Tj) 1 26V 370mV@(3A) 37mA 3A 400uVrms、260uVrms Adjustable Over Current Protection、Over Temperature Protection、Reverse connection protection、Enable Positive TO-263-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LVC1G18DBVR-TP
SOT-23-6-40℃~+125℃ 1.65V~5.5V 1/2 10uA 3.4ns@5V,50pF 32mA 32mA 74LVC Decoder Output enable high-impedance、Tri-state output Single Supply SOT-23-6 Signal Switches, Multiplexers, Decoders ROHSTECH PUBLICSignal Switches, Multiplexers, Decoders
README
README.mdQSAT PCB Files
Overview
This README contains information on how to setup your KiCad 6.0 environment. It includes:
- How to use the existing schematic symbols and layout footprints
- How to start a new project from an existing template
- How to prepare the manufacturing and assembly files for ordering from JLCPCB
Using QSAT PCB Symbols and Footprints
Following the instructions provided here: How to Import into KiCad v6
Import Symbols
-
In KiCad, go to Preferences.
-
Click on Manage Symbol Libraries.
-
On the Global Libraries tab, click on Browse Libraries (the small folder icon below)
-
Select the .lib file, then click Open.
-
The library will appear, click OK.
-
Click on Symbol Editor.
-
Type on the filter search field, and navigate to the symbol you imported. Double-click over it to open the file.
Import Footprints
Using the *.kicad_mod file:
-
In KiCad, go to Preferences.
-
Click on Manage Footprint Libraries.
-
On the Global Libraries tab, click on Browse Libraries (the small folder icon below)
-
Navigate to the Folder of the downloaded .kicad_mod file. Then click Select Folder.
-
The library will appear, click OK.
-
Click on Footprint Editor.
-
Type on the filter search field, and navigate to the footprint you imported. Double-click over it to open the file.
Using QSAT PCB Templates
Following the instructions provided here: KiCad Creating Templates we must:
- Update our path configurations in KiCad to include the template folder.
a. Go to Preferences -> Configure Paths in the KiCad GUI.
b. Go to KICAD_USER_TEMPLATE_DIR and double click the path name until a folder apprears.
c. Navigate to the QSAT/pcbs/qsat-templates directory and hit Select Folder
- Create a new project from the template.
a. Go to File -> New Project From Template... in the KiCad GUI.
b. Select the User Templates tab, and choose the template you want.
Note: If starting a project from scratch it is recommended to use the QSAT - PC104 Base Board This is designed to have the same pcb footprint as the Clyde Space EPS board with mounting holes and a PC104 connector.
Ordering From JLCPCB
JLC has provided instructions for their required procedure, and is well detailed.
The steps to generate the manufacturing files are found here.
And the steps to generate the BOM and Centroid files are found here.
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | IRLR120N | Package_TO_SOT_SMD:TO-252-2 | QXF1, QXF2, QXR1, QXR2, QYF1, QYF2, QYR1, QYR2, QZF1, QZF2, QZR1, QZR2 |
| 9 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C7, C9, C10, C11, C12 |
| 4 | 2k2 | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_TopBottom | H5, H6, H7, H8 |
| 4 | ORANGE | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C6, C8 |
| 3 | MCP42010 | MCP42010-E_SL:SOIC127P600X175-14N | UPX1, UPY1, UPZ1 |
| 3 | MIC29302WU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | ULX1, ULY1, ULZ1 |
| 3 | SN74LVC1G18DBVR | SN74LVC1G18DBVR:SOT95P280X145-6N | UDX1, UDY1, UDZ1 |
| 2 | , | ||
| 2 | LOGO | LOGO | G***, G*** |
| 1 | PC104_Connector | pc104-connector:pc104-connector | J1 |
| 1 | X/Y_Coils | CoilFootprints:Front Coils Mount | U1 |
| 1 | Z_Coil | MCP42010-E_SL:ZCoil | U2 |
More from queens-satellite-team/pcbs
12- 4 layers90.2 × 96 mm

- 4 layers95 × 95 mm

- 4 layers90.2 × 95.9 mm

- 2 layers139.1 × 55.1 mm

- 4 layers94 × 94 mm

- 4 layers90.2 × 95.9 mm

- 4 layers90.2 × 95.9 mm

- 4 layers90.2 × 95.9 mm

- 2 layers83 × 113 mm

- 4 layers90.2 × 95.9 mm

- 4 layers45.1 × 43.2 mm

- 2 layers66.7 × 61 mm

Similar boards
- 4 layers81 × 113.2 mm

Auralab Workstation Vishal
Vishalbabu-09/Auralab_Workstation
Advanced 4-layer PCB design featuring split-plane noise isolation (AGND/DGND) and asynchronous dual-core processing. Implements a handheld multi-tool oscilloscope, current tracker, and symmetrical DC power supply.
81 parts1 - 2 layers241.3 × 190.5 mm

- 2 layers381 × 50.8 mm

StereoTheremin
mikechristle/StereoTheremin
I'm sure you are familiar with the Theremin. It is a musical instrument that uses hand movements to control pitch and volume. With my version each hand controls both pitch and volume.
92 partsMIT - 2 layers95 × 95 mm

- 2 layers101.6 × 32.4 mm

- 2 layers58.4 × 31.8 mm

- 2 layers92.7 × 67.3 mm

Rpi wiringpi unit test platform board-2
stevieb9/rpi-wiringpi
Perl interface to Raspberry Pi's board, GPIO and various sensors and ICs
26 parts10 - 2 layers86.5 × 70.3 mm

SensactHsExt
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
175 parts4Apache-2.0
Questions
How big is the MagnetorquerFinalBoard PCB?
It measures 90.2 × 95.9 mm and has 4 copper layers, 4.69 mm thick.
What parts does the MagnetorquerFinalBoard use?
63 parts, built around the IRLR120N, MCP42010-I/P, MIC29302WU and SN74LVC1G18DBVR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MagnetorquerFinalBoard KiCad files?
From the queens-satellite-team/pcbs repository on GitHub, at the commit this page was made from: the board is ADCS_Boards/mtr-db/MagnetorquerFinalBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MagnetorquerFinalBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask queens-satellite-team before reusing the design.