Skip to the content
2 layers70.9 × 44.9 mmLightning detector, the printed circuit board in 3D

Lightning detector

pypilot/pypilot_mfd4

lcd display for various types of marine data including nmea0183, signalk and pypilot

Size
70.9 × 44.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
44
Pads
122
Tracks, vias
288, 21
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
28 Mar 2024
Updated
23 Mar 2026

Overview

Lightning detector is an open-source printed circuit board by pypilot, from the pypilot/pypilot_mfd repository on GitHub. It is a 2-layer board of 70.9 × 44.9 mm with 30 parts on 44 nets, routed with 288 tracks and 21 vias.

It is built around the ESP32-WROOM-32, VEML7700-TT and TPS7A0533PDBZR-HXY. Its parts include 9 resistors, 6 connectors, 5 capacitors, 3 ICs and 3 transistors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.

Main components

3

README

README.md

This repository contains code for an open source multifunction marine display.

The data formats currently are nmea0183, signalK, and direct communication to pypilot.

It supports zeroconf (mDNS) to detect pypilot and signalk servers. There is support for wifi, usb (serial port) and nmea0183 (rs422) communications.

The esp32s3 can drive high resolution (800x480) RGB parallel dayligth visible lcd.

A standard esp32 can be used for monochrome displays eg: jlx256160

3d printed enclosures may be waterproofed by treating (100% infill and soaking with dichtol) (FDM) or by printing with SLA/SLS. The plexiglass cover is sealed with a rubber oring tested submerged under water for prolonged periods.

Wireless sensors are implemented specifically:

  • 3d printed wind sensors using ceramic bearings and hall effect sensors (non contact) Multiple wind sensors can be used mounted in different locations on the boat, and the sensors can compensate motion using inertial sensors.
  • pressure, humidity and air quality sensors (bme680)
  • lightning, uv and visible light sensors
  • (planned but not fully implemented) sonar for depth, water speed, water temperature.

Parts

30
QtyValueFootprintReferences
410kResistor_SMD:R_0805_2012MetricR1, R2, R3, R4
310uCapacitor_SMD:C_1206_3216MetricC3, C6, C9
2100nCapacitor_SMD:C_0805_2012MetricC2, C5
22MResistor_SMD:R_0805_2012MetricR18, R19
2BatteryConnector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatForkBC1, BC2
2Q_PNP_BECpypilot_footprints:SOT-23_180Q2, Q4
2Solar_CellsConnector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatForkSC1, SC2
115kResistor_SMD:R_0805_2012MetricR16
12.4kResistor_SMD:R_0805_2012MetricR32
133kResistor_SMD:R_0805_2012MetricR17
1AS7731Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ5
1CJMCU-3935Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ6
1CJMCU-3935Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_VerticalJ1
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U1
1Q_PMOS_GSDpypilot_footprints:SOT-23_180Q3
1TL431DBZpypilot_footprints:SOT-23_180U3
1TPS7A0533PDBZRPackage_TO_SOT_SMD:SOT-23U2
1VEML7700Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1bootConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1jstConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ4

More from pypilot/pypilot_mfd

4
  • 2 layers115.8 × 85.9 mmPypilot mfd, the printed circuit board in 3D

    Pypilot mfd

    pypilot/pypilot_mfd

    lcd display for various types of marine data including nmea0183, signalk and pypilot

    103 parts4
  • 2 layers53.9 × 29.7 mmWind transmitter, the printed circuit board in 3D

    Wind transmitter

    pypilot/pypilot_mfd

    lcd display for various types of marine data including nmea0183, signalk and pypilot

    43 parts4
  • 4 layers277.9 × 24 mmAnemometer board, the printed circuit board in 3D

    Anemometer board

    pypilot/pypilot_mfd

    lcd display for various types of marine data including nmea0183, signalk and pypilot

    41 parts4
  • 2 layers38.5 × 51.9 mmTemperature pressure humidity gas, the printed circuit board in 3D

    Temperature pressure humidity gas

    pypilot/pypilot_mfd

    lcd display for various types of marine data including nmea0183, signalk and pypilot

    37 parts4

Similar boards

  • 2 layers20 × 46 mmTs13 dev kit, the printed circuit board in 3D

    Ts13 dev kit

    tropicsquare/tropic01-stm32u5-usb-devkit-hw

    Contains design files for TROPIC01 usb devkit based on STM32U5

    68 parts5BSD-3-Clause-Clear
  • 2 layers72 × 67 mmEV Design Challenge, the printed circuit board in 3D

    EV Design Challenge

    land-barrett/EV_Design_Challenge

    KiCAD files of 2026 TAMU SAE Formula EV electrical design challenge

    78 parts
  • 2 layers20 × 46 mmTs13 dev kit, the printed circuit board in 3D

    Ts13 dev kit

    tropicsquare/devboards

    Repository collects hw resources for development boards which are available for the TROPIC01 chip

    70 parts4
  • 2 layers60 × 30 mmTd free, the printed circuit board in 3D

    Td free

    mawoka-myblock/td-free

    Measure the TD of your filament easily

    24 parts60EUPL-1.2
  • 4 layers81.2 × 81.2 mmView base, the printed circuit board in 3D

    View base

    SeedLabs-it/smartknob-hardware

    PCB and CAD files for smartknob devkit

    259 parts47
  • 4 layers239.5 × 239.5 mmBroadcast clock, the printed circuit board in 3D

    Broadcast clock

    espena/broadcast-clock

    Digital precision studio/broadcast masterclock with WiFi configuration, acts as local NTP server with accurate GPS time sync.

    440 parts28GPL-3.0
  • 2 layers38.3 × 20.8 mmESP AHT10-Extra, the printed circuit board in 3D

    ESP AHT10-Extra

    c-/ESP-AHT10-Extra

    minimalist ESP-8266 temperature/humidity sensor

    27 parts20
  • 2 layers36.8 × 90.9 mmBwlr3d, the printed circuit board in 3D

    Bwlr3d

    teapotlaboratories/bwlr3d

    Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting

    108 parts18MIT

Questions

How big is the Lightning detector PCB?

It measures 70.9 × 44.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lightning detector use?

30 parts, built around the ESP32-WROOM-32, VEML7700-TT and TPS7A0533PDBZR-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lightning detector KiCad files?

From the pypilot/pypilot_mfd repository on GitHub, at the commit this page was made from: the board is sensors/lightning_detector/schematic/lightning_detector.kicad_pcb and its schematic schematic/ideal_diode+.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lightning detector design in my own project?

Its repository states no licence, so its author keeps all rights: ask pypilot before reusing the design.