
HW4
klemensiten/ME433
Repo of Klemens Iten for MECH_ENG 433: Advanced Mechatronics, Spring 2023 @ Northwestern University.

ME 433 - Advanced Mechatronics @ NU
HW4 is an open-source printed circuit board by pwndr3, from the pwndr3/ME433 repository on GitHub. It is a 2-layer board of 50.3 × 50 mm with 23 parts on 33 nets, routed with 168 tracks and 16 vias.
It is built around the CP2102N-EK and AP7381-33V-A. Its parts include 6 capacitors, 5 resistors, 4 connectors, 3 diodes and 3 switches.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1 uF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3 |
| 3 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R5 |
| 2 | 0.1 uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C5, C6 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 1 | 10 uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C4 |
| 1 | AP7381-33V | Package_TO_SOT_THT:TO-92_Inline_Wide | U1 |
| 1 | BATTERY | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | CP2102N | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | GREEN | LED_THT:LED_D3.0mm | D2 |
| 1 | LEFT | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3 |
| 1 | POWER | LED_THT:LED_D3.0mm | D1 |
| 1 | POWER SELECT | Library:SWITCH | SW1 |
| 1 | RESET | Library:PUSH | SW2 |
| 1 | RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J4 |
| 1 | USER | Library:PUSH | SW3 |
| 1 | YELLOW | LED_THT:LED_D3.0mm | D3 |
| 1 | ~ | Package_DIP:DIP-28_W7.62mm_Socket | U2 |

klemensiten/ME433
Repo of Klemens Iten for MECH_ENG 433: Advanced Mechatronics, Spring 2023 @ Northwestern University.




Spaceflight-Rocketry-Giessen-e-V/Telemetry
Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules


DevMubarak1/PidginTranslator
Handheld translator for Nigerian languages. No internet needed for common phrases, YarnGPT for everything else.

eflukx/Stepcraft-GRBLizer
Replacement ('Arduino') controller that fits inside a Stepcraft CNC machine. Comptatible with GRBL and EstlCAM
It measures 50.3 × 50 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the CP2102N-EK and AP7381-33V-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pwndr3/ME433 repository on GitHub, at the commit this page was made from: the board is HW4/HW4/HW4.kicad_pcb and its schematic HW4/HW4/HW4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pwndr3 before reusing the design.