4 layers130 × 130 mm
Smart Metering
frahncky/Smart-Metering
Analisador trifásico de energia e qualidade de energia com interface gráfica touchscreen.
230 parts
4 layers115 × 75 mm
RF module
putsolardynamics/Telemetry-Module2- Size
- 115 × 75 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 146
- Nets
- 162
- Pads
- 529
- Tracks, vias
- 1,094, 331
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Feb 2023
- Updated
- 14 Aug 2024
Overview
RF module is an open-source printed circuit board by putsolardynamics, from the putsolardynamics/Telemetry-Module repository on GitHub, published under the MIT licence. It is a 4-layer board of 115 × 75 mm with 146 parts on 162 nets, routed with 1,094 tracks and 331 vias.
It is built around the STM32F413RHT6, SN65HVD231D and NEO-M9N-00B, with the TSR 1-2433, USBLC6-2SC6 and MPU-6050 among its other parts. Its parts include 40 capacitors, 33 resistors, 14 connectors, 10 ICs and 7 diodes. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
12
STM32F413RHT6
LQFP-64(10x10)-40℃~+85℃ 1.5MB 1.7V~3.6V 100MHz 12bit 12bit 32 Bit 320KB 50 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN65HVD231D
SOIC-8-40℃~+85℃ 17mA 1Mbps 1uA 3V~3.6V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
NEO-M9N-00B
SMD-24P-167dBm -40℃~+85℃ 2.7V~3.6V 24s 2m 36mA@3.0V GPS、BDS、QZSS、Galileo、GLONASS RTC backup power UART、I2C、USB、SPI、JTAG SMD-24P GNSS Modules ROHSu-bloxGNSS Modules
TSR 1-2433
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 3.3V 300uA 50mVp-p 6V~36V 7.5mm 80%、90% 850kHz Plastic encapsulated type Short Circuit Protection、Automatic fault recovery Step-down type ±1% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
MIC5365-3.3YC5-TR
SC-70-5-40℃~+125℃ 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 65dB@(10kHz)、80dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PESD1CAN,215-ES
SOT-23ESD And Surge Protection (TVS/ESD)ElecSuper
0ZCJ0035AF2E
1206-40℃~+85℃ 1.2Ω 300mΩ 30V 350mA 400mW 40A 750mA 8s 1206 Resettable Fuses ROHSBel FuseResettable Fuses
2998TR
-- ROHSKeystone ElectronicsBatteryConnectorFDS6898A
SOIC-8-55℃~+150℃ 1.821nF 14mΩ@4.5V 16nC 1V 2 N-Channel 208pF 20V 2W 9.4A SO-8 MOSFETs ROHSonsemiMOSFETsUSB3075-30-A
SMD-30℃~+85℃ 1 1A、1.8A 30V 5P Black Female Micro-B USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdTelemetry-Module
Parts
146| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5, C6, C7, C8, C18, C21, C31, C41, C42, C72 |
| 10 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13, C14, C30, C34, C60, C80, C83, C84, C85 |
| 10 | FerriteBead_Small | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10 |
| 9 | 0 | R_0603_1608Metric | R3, R4, R13, R17, R18, R19, R20, R24, R25 |
| 9 | 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C11, C19, C22, C32, C44, C71, C73, C81 |
| 5 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R9, R12, R82 |
| 4 | 4.7K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R41, R42 |
| 4 | 436500300 | 436500300 | J81, J82, J91, J92 |
| 4 | 62 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22, R31, R32 |
| 4 | M3 | MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R80, R101, R102 |
| 3 | 4.7n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23, C33, C82 |
| 3 | LED BLUE | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D6 |
| 2 | 10p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | 10u | EEE0GA101SR | C61, C62 |
| 2 | 133K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R61, R64 |
| 2 | 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | 510 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R33 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | MIC5365-3.3YC5-TR | SOT65P210X110-5N | PS1, PS2 |
| 2 | PESD1CAN,215 | SOT95P230X110-3N | D4, D5 |
| 2 | SN65HVD231 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP80 |
| 2 | TestPoint_Pad_D1.0mm | TestPoint_Pad_D1.0mm | TP_SDA, TP_SDA |
| 2 | USBLC6-2SC6 | SOT-23-6 | U5, U9 |
| 1 | 0ZCJ0035AF2E | FUSC3216X130N | F1 |
| 1 | 167K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R62 |
| 1 | 2.2n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C43 |
| 1 | 27n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | 2998TR | 2998TR | J10 |
| 1 | 4.5M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R63 |
| 1 | BOOT1 | TestPoint_Pad_D2.0mm | TP3 |
| 1 | BOOT_SEL | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ECS-160-10-36 16MHz | ECS1601036CKMTR3 | Y1 |
| 1 | ESD TWS | DIONM7959X262N | D7 |
| 1 | FAULT | TestPoint_Pad_D2.0mm | TP1 |
| 1 | FDS6898A | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | GND | TestPoint_Pad_D2.0mm | TP234 |
| 1 | I2C3 | JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J5 |
| 1 | IMU_AUX_SCL | TestPoint_Pad_D2.0mm | TP42 |
| 1 | IMU_AUX_SDA | TestPoint_Pad_D2.0mm | TP41 |
| 1 | L | L_6.3x6.3_H3 | L1 |
| 1 | LED RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LTC4365xTS8 | TSOT-23-8 | U6 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | Molex Power | 43045-04_00,01,02,10_ | J7 |
| 1 | NEO-M9N | ublox_NEO | U8 |
| 1 | NRST | TestPoint_Pad_D2.0mm | TP2 |
| 1 | RSSI_PWM | TestPoint_Pad_D2.0mm | TP5 |
| 1 | SAFEBOOT | TestPoint_Pad_D2.0mm | TP7 |
| 1 | SLEEP_RQ | TestPoint_Pad_D2.0mm | TP6 |
| 1 | SMA | 518144002 | J8 |
| 1 | SPI3 | JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical | J6 |
| 1 | STM32F413RHT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SW_RST | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | SW_USR | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 1 | SolderJumper_3_Open | SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm | JP1 |
| 1 | TSR_1-2433 | Converter_DCDC_TRACO_TSR-1_THT | U7 |
| 1 | UART4 | JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J4 |
| 1 | USB3075-30-A | USB307530A | J9 |
| 1 | USB_C_Receptacle_USB2.0 | USB4500030A | J3 |
| 1 | VCC | TestPoint_Pad_D2.0mm | TP4 |
| 1 | Vref2 | TestPoint_Pad_D2.0mm | TP21 |
| 1 | Vref3 | TestPoint_Pad_D2.0mm | TP31 |
| 1 | XB3-24Z8UT-J | XB324Z8UTJ | IC1 |
Questions
How big is the RF module PCB?
It measures 115 × 75 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RF module use?
146 parts, built around the STM32F413RHT6, SN65HVD231D, NEO-M9N-00B and TSR 1-2433. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RF module KiCad files?
From the putsolardynamics/Telemetry-Module repository on GitHub, at the commit this page was made from: the board is Hardware/RF_module/RF_module.kicad_pcb and its schematic Hardware/RF_module/GPS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RF module design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers36 × 43 mm
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0 - 2 layers23 × 50 mm
- 4 layers63.5 × 63.5 mm
Blackpowder ignition
calstar/cas-pyro-hw
Common Avionics Stack - Blackpowder Ignition Module - Hardware
76 partsBSD-3-Clause - 4 layers91 × 30 mm
Methanesense
fredriknk/msense
Open Source hardware kicad source files for a NRF9160 based methane sensor utilizing MOX sensor.
145 partsMIT - 4 layers70 × 139.4 mm
- 2 layers49 × 36.5 mm
- 2 layers48.8 × 43.9 mm
Amiga-500-usb kb stamp
wiretap-retro/A500-USB-Keyboard-Adapter-RP2040
A USB keyboard adapter for the Amiga 500 based on the Pi Stamp RP2040
18 parts18